BR93LC46-W / BR93LC46F-W / BR93LC46RF-W /
Memory ICs BR93LC46FJ-W / BR93LC46RFJ-W / BR93LC46FV-W
64×16bits serial EEPROM
BR93LC46-W / BR93LC46F-W / BR93LC46RF-W /
BR93LC46FJ-W / BR93LC46RFJ-W / BR93LC46FV-W
The BR93LC46-W series are CMOS serial input / output-type memory circuits (EEPROMs) that can be programmed
electrically. Each is configured of 64 words × 16 bits (1,024 bits), and each word can be accessed individually and data
read from it and written to it. Operation control is performed using five types of commands.
The commands, addresses, and data are input through the DI pin under the control of the CS and SK pins. In a write
operation, the internal status signal (READY or BUSY) can be output from the DO pin.
zApplications
VCRs, TVs, printers, car stereos, cordless telephones, short wave radios, programmable DIP switches, and
other battery-powered equipment requiring low voltage and low current
zFeatures
1) 64 words × 16 bits EEPROM
2) Operating voltage range
When reading : 2.0 to 5.5V
When writing : 2.7 to 5.5V
3) Low current consumption
Operating (at 5V) : 3mA (Max.)
Standby (at 5V) : 5µA (Max.)
4) Address can be incremented automatically during
read operations.
5) Auto erase and auto complete functions can be used
during write operations.
6) A write instruction inhibit function allows :
- write protection when power supply voltage is low.
- write disable state at power up.
- writing using command codes.
7) Compact packages
8) Display of READY / BUSY status
9) TTL-compatible input / output
10) Rewriting possible up to 100,000 times
11) Data can be stored for ten years without corruption.
zBlock diagram
16bits
16bits
6bits
CS
SK
DI
DO
6bits
Command decode
Control
Clock generation
Command
register
Dummy bits
Address
buffer
Data
register
Power supply
voltage detector
Write
disable
High voltage
generator
Address
decoder
R / W
amplifier
1,024bits
EEPROM array