BQ2110
器件描述：NiCd or NiMH Gas Gauge Module
器件厂商：TI [Texas Instruments]
厂商主页：http://www.ti.com/
文件大小：770.24KB，共8页
Sponsor by e络盟器件资料摘要：
Features
c228 Complete bq2010 Gas Gauge solution for NiCd or
NiMH battery packs
c228 Battery information available over a single-wire
bidirectional serial port
c228 Battery state-of-charge monitoring for 4- to 12-cell
series applications
c228 On-board regulator allows direct connection to the
battery
c228 “L” version includes push-button activated LEDs to
display state-of-charge information
c228 Nominal capacity and cell chemistry pre-configured
c228 Compact size for battery pack integration
General Description
The bq2110 Gas Gauge Module provides a complete and
compact solution for capacity monitoring of NiCd and
NiMH battery packs. Designed for battery pack integra-
tion, the bq2110 incorporates a bq2010 Gas Gauge IC, a
current sense resistor, and all other components neces-
sary to accurately monitor and display the capacity of 4
to 12 series cells. The bq2110L includes six surface-
mounted LEDs to display remaining capacity in 20% in-
crements of the learned capacity (relative mode) or pro-
grammed capacity (absolute mode). The sixth LED is
used in absolute mode to represent an overfull condition
(charge above the programmed capacity). The LEDs are
activated with the onboard push-button switch.
Contacts are provided on the bq2110 for direct connec-
tion to the battery stack (BAT+, BAT-), the serial com-
munications port (DQ), and the empty indicator
(EMPTY). Please refer to the bq2010 data sheet for the
specifics on the operation of the Gas Gauge.
Unitrode configures the bq2110 based on the informa-
tion requested in Table 1. The configuration defines the
number of series cells, the nominal battery pack capac-
ity, the self-discharge rate, and the LED display mode.
A module development kit is also available for the
bq2110. The bq2110B-KT or bq2110LB-KT includes one
configured module and the following:
1) An interface board that allows connection to the se-
rial port of an AT-compatible computer.
2) Menu-driven software with the bq2110 to display
charge/discharge activity and to allow user inter-
face to the bq2010 from any standard DOS PC.
3) Source code for the TSR.
Pin Descriptions
P1 DQ/Serial communication port
P2 BAT+/Battery positive/pack positive
P3 No connect
P4 EMPTY/Empty indicator output
P5 GND/Ground
P6 PACK-/Pack negative
P7 BAT-/Battery negative
1
NiCd or NiMH Gas Gauge Module
bq2110
5/99 B
c228 Complete bq2010 Gas Gauge solution for NiCd or
NiMH battery packs
c228 Battery information available over a single-wire
bidirectional serial port
c228 Battery state-of-charge monitoring for 4- to 12-cell
series applications
c228 On-board regulator allows direct connection to the
battery
c228 “L” version includes push-button activated LEDs to
display state-of-charge information
c228 Nominal capacity and cell chemistry pre-configured
c228 Compact size for battery pack integration
General Description
The bq2110 Gas Gauge Module provides a complete and
compact solution for capacity monitoring of NiCd and
NiMH battery packs. Designed for battery pack integra-
tion, the bq2110 incorporates a bq2010 Gas Gauge IC, a
current sense resistor, and all other components neces-
sary to accurately monitor and display the capacity of 4
to 12 series cells. The bq2110L includes six surface-
mounted LEDs to display remaining capacity in 20% in-
crements of the learned capacity (relative mode) or pro-
grammed capacity (absolute mode). The sixth LED is
used in absolute mode to represent an overfull condition
(charge above the programmed capacity). The LEDs are
activated with the onboard push-button switch.
Contacts are provided on the bq2110 for direct connec-
tion to the battery stack (BAT+, BAT-), the serial com-
munications port (DQ), and the empty indicator
(EMPTY). Please refer to the bq2010 data sheet for the
specifics on the operation of the Gas Gauge.
Unitrode configures the bq2110 based on the informa-
tion requested in Table 1. The configuration defines the
number of series cells, the nominal battery pack capac-
ity, the self-discharge rate, and the LED display mode.
A module development kit is also available for the
bq2110. The bq2110B-KT or bq2110LB-KT includes one
configured module and the following:
1) An interface board that allows connection to the se-
rial port of an AT-compatible computer.
2) Menu-driven software with the bq2110 to display
charge/discharge activity and to allow user inter-
face to the bq2010 from any standard DOS PC.
3) Source code for the TSR.
Pin Descriptions
P1 DQ/Serial communication port
P2 BAT+/Battery positive/pack positive
P3 No connect
P4 EMPTY/Empty indicator output
P5 GND/Ground
P6 PACK-/Pack negative
P7 BAT-/Battery negative
1
NiCd or NiMH Gas Gauge Module
bq2110
5/99 B