PRELIMINARY
This document contains information on a product under development at Advanced Micro Devices. The information
is intended to help you evaluate this product. AMD reserves the right to change or discontinue work on this proposed
product without notice.
Publication# 20975 Rev: D Amendment/+1
Issue Date: May 1998
AmMC0XXA
2, 4, or 8 Megabyte 5.0 Volt-only Flash Miniature Card
DISTINCTIVE CHARACTERISTICS
a73 2, 4, or 8 Mbytes of addressable Flash memory
a73 5.0 Volt-only, single power supply operation
— Write and read voltage: 5.0 V ± 10%
— No additional supply current required for V
PP
a73 Fast access time
— 100 or 150 ns access time
a73 CMOS low power consumption
— Typical active read current:
70 mA (word mode)
— Typical active erase/write current:
100 mA (word mode)
— Typical standby current:
10 µA (8 Mbyte card)
a73 High write endurance
— Guaranteed minimum 100,000 write/erase
cycles per card
— More than 1,000,000 cycles per card typical
a73 Uniform sector architecture
— 64K byte individually useable sectors
— Erase Suspend/Resume increases system level
performance
— BUSY# and RESET# signals
a73 Zero data retention power
— No power required to retain data
a73 Available in industrial temperature grade
(–40°C to +85°C)
a73 Miniature Card standard form factor
— True interchangeability
— 60-pad connector
— Supports multiple technologies
— Sonic welded stainless steel case
— PCMCIA Type II adapter available
— Selectable byte- or word-wide configuration
— Small form factor (38 mm x 33 mm x 3.5 mm)
a73 60 connection bus
— 16-bit data bus
— 25-bit address bus
— Easy system integration
— Low cost implementation
— Low cost cards
a73 Consumer-friendly mechanicals
— User can easily insert and remove card, upgrade
memory, and add applications
a73 Voltage level keying
— Does not allow a 5 V card to plug into a 3 V
system and vice versa
— Single power supply design
— System does not need a separate program
voltage supply; only one is necessary to read
and write
GENERAL DESCRIPTION
The Miniature Card is an expansion card that provides
a high-performance, small form factor solution for data
and file storage to the portable, handheld market,
which includes audio, digital film, wireless, and PDA
(Portable Digital Assistant) applications. The Miniature
Card provides a low cost, low power, high performance
interface for memory cards.
Miniature cards can be easily “snapped” into the back
of an electronic system and can be readily removed
and replaced by end users. AMD’s 5 V Flash Miniature
Cards are manufactured using AMD’s industry leading
5.0 volt-only, single-power-supply Am29F080B and
Am29F017B Flash Memory devices, ensuring high reli-
ability and excellent performance. The Miniature Card
is less than 30% of the size of a PCMCIA memory card.
Applications include digital voice recorders, pocket
PCs and intelligent organizers, smart cellular tele-
phones, voice and data messaging pagers, digital still
cameras and portable instrumentation equipment.
The Miniature Card specification will be defined by
PCMCIA as of October 1997. The participating associ-
ation members include major Flash memory vendors
and leading consumer electronics OEMs. The goal of
the Miniature Card specification is to promote an open,
interoperable small-form-factor memory card standard.
For more information on the Miniature Card specifica-