8001401ZX
器件资料摘要：
ELH0033G/883/8001401ZX
July
1992
Rev
H
ELH0033G/883/8001401ZX
Fast Buffer Amplifier
Note: All information contained in this data sheet has been carefully checked and is believed to be accurate as of the date of publication; however, this data sheet cannot be a ‘‘controlled document’’. Current revisions, if any, to these
specifications are maintained at the factory and are available upon your request. We recommend checking the revision level before finalization of your design documentation. Patent pending.
'1989 Elantec, Inc.
Features
# Slew rate—1500 V/ms
# Output drive—100 mA
# Rise and fall times—2.9 ns
# Input resistance—10
11
X
# Power bandwidth—100 MHz
# MIL-STD-883 devices 100%
manufactured in U.S.A.
Advantages
# Excellent phase linearity
# Driver cables and other
capacitive loads
# Wide supply range, single or split
Ordering Information
Part No. Temp. Range Package Outline
ELH0033G/883B b55§Ctoa125§C TO-8 MDP0002
8001401ZX is the SMD version of this device.
Connection Diagram
12-Pin TO-8
0033–1
Top View
Note: Case is electrically isolated.
General Description
The ELH0033 is a high-speed, FET input voltage follower buff-
er designed to provide high output currents from DC to over
100 MHz. The ELH0033 slews at 1500 V/ms and will drive 100X
loads. Phase linearity is excellent to 20 MHz, allowing the buff-
er to be included in op amp loops.
The ELH0033 is intended to fulfill a wide range of buffer appli-
cations such as high-speed line drivers, video impedance trans-
formation, nuclear instrumentation amplifiers, op amp isolation
buffers for driving reactive loads and high impedance input
buffers for high-speed A to D’s and comparators.
These devices are constructed using specially selected junction
FETs and active laser trimming to achieve guaranteed perform-
ance specifications. The ELH0033 is specified for operation
from
b
55§Cto
a
125§C.
Elantec facilities comply with MIL-I-45208A and other applica-
ble quality specifications. Elantec’s Military devices are 100%
fabricated and assembled in our rigidly controlled, ultra-clean
facilities in Milpitas, California. For additional information on
Elantec’s Quality and Reliability Assurance policy and proce-
dures request brochure QRA-1.
Equivalent Schematic
0033–2
July
1992
Rev
H
ELH0033G/883/8001401ZX
Fast Buffer Amplifier
Note: All information contained in this data sheet has been carefully checked and is believed to be accurate as of the date of publication; however, this data sheet cannot be a ‘‘controlled document’’. Current revisions, if any, to these
specifications are maintained at the factory and are available upon your request. We recommend checking the revision level before finalization of your design documentation. Patent pending.
'1989 Elantec, Inc.
Features
# Slew rate—1500 V/ms
# Output drive—100 mA
# Rise and fall times—2.9 ns
# Input resistance—10
11
X
# Power bandwidth—100 MHz
# MIL-STD-883 devices 100%
manufactured in U.S.A.
Advantages
# Excellent phase linearity
# Driver cables and other
capacitive loads
# Wide supply range, single or split
Ordering Information
Part No. Temp. Range Package Outline
ELH0033G/883B b55§Ctoa125§C TO-8 MDP0002
8001401ZX is the SMD version of this device.
Connection Diagram
12-Pin TO-8
0033–1
Top View
Note: Case is electrically isolated.
General Description
The ELH0033 is a high-speed, FET input voltage follower buff-
er designed to provide high output currents from DC to over
100 MHz. The ELH0033 slews at 1500 V/ms and will drive 100X
loads. Phase linearity is excellent to 20 MHz, allowing the buff-
er to be included in op amp loops.
The ELH0033 is intended to fulfill a wide range of buffer appli-
cations such as high-speed line drivers, video impedance trans-
formation, nuclear instrumentation amplifiers, op amp isolation
buffers for driving reactive loads and high impedance input
buffers for high-speed A to D’s and comparators.
These devices are constructed using specially selected junction
FETs and active laser trimming to achieve guaranteed perform-
ance specifications. The ELH0033 is specified for operation
from
b
55§Cto
a
125§C.
Elantec facilities comply with MIL-I-45208A and other applica-
ble quality specifications. Elantec’s Military devices are 100%
fabricated and assembled in our rigidly controlled, ultra-clean
facilities in Milpitas, California. For additional information on
Elantec’s Quality and Reliability Assurance policy and proce-
dures request brochure QRA-1.
Equivalent Schematic
0033–2