8XC196MH
器件描述：8XC196MH INDUSTRIAL MOTOR CONTROL CHMOS MICROCONTROLLER
器件厂商：INTEL [Intel Corporation]
文件大小：594.57KB，共41页
Sponsor by e络盟器件资料摘要：
Intel Corporation assumes no responsibility for the use of any circuitry other than circuitry embodied in an Intel product. No other circuit patent
licenses are implied. Information contained herein supersedes previously published specifications on these devices from Intel.
© INTEL CORPORATION, 1995 September 1995 Order Number: 272543-001
®
8XC196MH INDUSTRIAL MOTOR CONTROL
CHMOS MICROCONTROLLER
The 8XC196MH is a member of Intel’s family of 16-bit MCS
®
96 microcontrollers. It is designed primarily to
control three-phase AC induction and DC brushless motors. It features an enhanced three-phase waveform
generator specifically designed for use in “inverter” motor-control applications. This peripheral provides pulse-
width modulation and three-phase sine wave generation with minimal CPU intervention. It generates three
complementary non-overlapping PWM pulses with resolutions of 0.125 µs (edge triggered) or 0.250 µs
(centered).
The 8XC196MH has two dedicated serial port peripherals, allowing less software overhead. The watchdog timer
can be programmed with one of four time options.
The 8XC196MH is available without internal memory (80C196MH), with 32 Kbytes of factory programmed
OTPROM* (83C196MH), or with 32 Kbytes of user programmable OTPROM* (87C196MH). It is available in
three packages: 84-lead PLCC, 80-lead Shrink EIAJ/QFP, and 64-lead SDIP. The 64-lead package does not
contain pins for the P5.1/INST and P6.7/PWM1 signals.
Operational characteristics are guaranteed over the temperature range of – 40°C to + 85°C.
*One-Time Programmable Read-Only Memory (OTPROM) is similar to EPROM but comes in an unwindowed package and
cannot be erased. It is user programmable.
G6e High Performance CHMOS 16-bit CPU
G6e 16 MHz Operating Frequency
G6e 32 Kbytes of On-chip OTPROM/ROM
G6e 744 Bytes of On-chip Register RAM
G6e Register-to-register Architecture
G6e 16 Prioritized Interrupt Sources
G6e Peripheral Transaction Server (PTS) with 15
Prioritized Sources
G6e Up to 52 I/O Lines
G6e 3-phase Complementary Waveform Generator
G6e 8-channel 8- or 10-bit A/D with Sample and
Hold
G6e 2-channel UART
G6e Event Processor Array (EPA) with 2 High-
speed Capture/Compare Modules and 4 High-
speed Compare-only Modules
G6e Two Programmable 16-bit Timers with
Quadrature Counting Inputs
G6e Two Pulse-width Modulator (PWM) Outputs
with High Drive Capability
G6e Flexible 8- or 16-bit External Bus
G6e 1.75 µs 16
×
16 Multiply
G6e 3 µs 32/16 Divide
G6e Extended Temperature Available
G6e Idle and Powerdown Modes
G6e Watchdog Timer
licenses are implied. Information contained herein supersedes previously published specifications on these devices from Intel.
© INTEL CORPORATION, 1995 September 1995 Order Number: 272543-001
®
8XC196MH INDUSTRIAL MOTOR CONTROL
CHMOS MICROCONTROLLER
The 8XC196MH is a member of Intel’s family of 16-bit MCS
®
96 microcontrollers. It is designed primarily to
control three-phase AC induction and DC brushless motors. It features an enhanced three-phase waveform
generator specifically designed for use in “inverter” motor-control applications. This peripheral provides pulse-
width modulation and three-phase sine wave generation with minimal CPU intervention. It generates three
complementary non-overlapping PWM pulses with resolutions of 0.125 µs (edge triggered) or 0.250 µs
(centered).
The 8XC196MH has two dedicated serial port peripherals, allowing less software overhead. The watchdog timer
can be programmed with one of four time options.
The 8XC196MH is available without internal memory (80C196MH), with 32 Kbytes of factory programmed
OTPROM* (83C196MH), or with 32 Kbytes of user programmable OTPROM* (87C196MH). It is available in
three packages: 84-lead PLCC, 80-lead Shrink EIAJ/QFP, and 64-lead SDIP. The 64-lead package does not
contain pins for the P5.1/INST and P6.7/PWM1 signals.
Operational characteristics are guaranteed over the temperature range of – 40°C to + 85°C.
*One-Time Programmable Read-Only Memory (OTPROM) is similar to EPROM but comes in an unwindowed package and
cannot be erased. It is user programmable.
G6e High Performance CHMOS 16-bit CPU
G6e 16 MHz Operating Frequency
G6e 32 Kbytes of On-chip OTPROM/ROM
G6e 744 Bytes of On-chip Register RAM
G6e Register-to-register Architecture
G6e 16 Prioritized Interrupt Sources
G6e Peripheral Transaction Server (PTS) with 15
Prioritized Sources
G6e Up to 52 I/O Lines
G6e 3-phase Complementary Waveform Generator
G6e 8-channel 8- or 10-bit A/D with Sample and
Hold
G6e 2-channel UART
G6e Event Processor Array (EPA) with 2 High-
speed Capture/Compare Modules and 4 High-
speed Compare-only Modules
G6e Two Programmable 16-bit Timers with
Quadrature Counting Inputs
G6e Two Pulse-width Modulator (PWM) Outputs
with High Drive Capability
G6e Flexible 8- or 16-bit External Bus
G6e 1.75 µs 16
×
16 Multiply
G6e 3 µs 32/16 Divide
G6e Extended Temperature Available
G6e Idle and Powerdown Modes
G6e Watchdog Timer