6N137
器件描述：Small Outline, 5 Lead, High CMR, High Speed, Logic Gate Optocouplers
器件厂商：HP [Agilent(Hewlett-Packard)]
文件大小：261.65KB，共10页
Sponsor by e络盟器件资料摘要：
CAUTION: The small device geometries inherent to the design of this bipolar component increase the component's
susceptibility to damage from electrostatic discharge (ESD). It is advised that normal static precautions be taken
in handling and assembly of this component to prevent damage and/or degradation which may be induced by
ESD.
Small Outline, 5 Lead, High
CMR, High Speed, Logic Gate
Optocouplers
Technical Data HCPL-M600
HCPL-M601
HCPL-M611
Description
These small outline high CMR,
high speed, logic gate optocoup-
lers are single channel devices in
a five lead miniature footprint.
They are electrically equivalent to
the following Agilent
optocouplers (except there is no
output enable feature):
SO-5 Package Standard DIP SO-8 Package
HCPL-M600 6N137 HCPL-0600
HCPL-M601 HCPL-2601 HCPL-0601
HCPL-M611 HCPL-2611 HCPL-0611
The SO-5 JEDEC registered (MO-
155) package outline does not
require “through holes” in a PCB.
This package occupies
approximately one fourth the
footprint area of the standard
dual-in-line package. The lead
profile is designed to be com-
patible with standard surface
mount processes.
The HCPL-M600/01/11 optically
coupled gates combine a GaAsP
light emitting diode and an
integrated high gain photon
detector. The output of the
detector I.C. is an Open-collector
Schottky-clamped transistor. The
internal shield provides a
guaranteed common mode
transient immunity specification of
5,000 V/µs for the HCPL-M601,
and 10,000 V/µs for the HCPL-
M611.
This unique design provides
maximum ac and dc circuit
isolation while achieving TTL
compatibility. The optocoupler ac
and dc operational parameters are
guaranteed from -40°C to 85°C
allowing trouble free system
performance.
Features
• Surface Mountable
• Very Small, Low Profile
JEDEC Registered Package
Outline
• Compatible with Infrared
Vapor Phase Reflow and
Wave Soldering Processes
• Internal Shield for High
Common Mode Rejection
(CMR)
HCPL-M601: 10,000 V/µs at
V
CM
= 50 V
HCPL-M611: 15,000 V/µs at
V
CM
= 1000 V
• High Speed: 10 Mbd
• LSTTL/TTL Compatible
• Low Input Current
Capability: 5 mA
• Guaranteed ac and dc
Performance over
Temperature: -40°C to 85°C
• Recognized under the
Component Program of U.L.
(File No. E55361) for
Dielectric Withstand Proof
Test Voltage of 2500 Vac, 1
Minute
susceptibility to damage from electrostatic discharge (ESD). It is advised that normal static precautions be taken
in handling and assembly of this component to prevent damage and/or degradation which may be induced by
ESD.
Small Outline, 5 Lead, High
CMR, High Speed, Logic Gate
Optocouplers
Technical Data HCPL-M600
HCPL-M601
HCPL-M611
Description
These small outline high CMR,
high speed, logic gate optocoup-
lers are single channel devices in
a five lead miniature footprint.
They are electrically equivalent to
the following Agilent
optocouplers (except there is no
output enable feature):
SO-5 Package Standard DIP SO-8 Package
HCPL-M600 6N137 HCPL-0600
HCPL-M601 HCPL-2601 HCPL-0601
HCPL-M611 HCPL-2611 HCPL-0611
The SO-5 JEDEC registered (MO-
155) package outline does not
require “through holes” in a PCB.
This package occupies
approximately one fourth the
footprint area of the standard
dual-in-line package. The lead
profile is designed to be com-
patible with standard surface
mount processes.
The HCPL-M600/01/11 optically
coupled gates combine a GaAsP
light emitting diode and an
integrated high gain photon
detector. The output of the
detector I.C. is an Open-collector
Schottky-clamped transistor. The
internal shield provides a
guaranteed common mode
transient immunity specification of
5,000 V/µs for the HCPL-M601,
and 10,000 V/µs for the HCPL-
M611.
This unique design provides
maximum ac and dc circuit
isolation while achieving TTL
compatibility. The optocoupler ac
and dc operational parameters are
guaranteed from -40°C to 85°C
allowing trouble free system
performance.
Features
• Surface Mountable
• Very Small, Low Profile
JEDEC Registered Package
Outline
• Compatible with Infrared
Vapor Phase Reflow and
Wave Soldering Processes
• Internal Shield for High
Common Mode Rejection
(CMR)
HCPL-M601: 10,000 V/µs at
V
CM
= 50 V
HCPL-M611: 15,000 V/µs at
V
CM
= 1000 V
• High Speed: 10 Mbd
• LSTTL/TTL Compatible
• Low Input Current
Capability: 5 mA
• Guaranteed ac and dc
Performance over
Temperature: -40°C to 85°C
• Recognized under the
Component Program of U.L.
(File No. E55361) for
Dielectric Withstand Proof
Test Voltage of 2500 Vac, 1
Minute