6KA24
器件描述：Automotive Transient Voltage Supressor
器件厂商：COMCHIP [Comchip Technology]
文件大小：67.95KB，共2页
Sponsor by e络盟器件资料摘要：
Stand-off Voltage: 24V
Peak Pulse Power: 6000W (10/1000µs)
6KA24
Features
Designed for under the hood applications
Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
Exclusive patented PAR® oxide passivated chip
construction
Low incremental surge resistance
Ideally suited for automotive “load dump”
applications
High temp. soldering guaranteed: 300°C/10 seconds,
0.375" (9.5mm) lead length, 5lbs. (2.3 kg) tension
Available in unidirectional only
Mechanical data
Case: Molded plastic body over nitride passivated die
Terminals: Axial leads solderable per MIL-STD-750,
Method 2026
Polarity: Color band denotes postitive end (cathode)
Weight: 0.07 oz., 2.1 g
Mounting Position: Any
Automotive Transient Voltage Supressor
www.comchiptech.com
COMCHIP
MDS0305003A Page 1
Maximum Ratings and Thermal Characteristics (TA = 25°C unless otherwise noted)
Parameter Symbol Limit Unit
Peak pulse power dissipation w/ 10/1000µs waveform
(1)
PPPM 6000 W
Peak pulse power dissipation w/ 10µs/50ms waveform
(2)
PPPM 2000 W
Steady state power dissipation
lead lengths 0.375” (9.5mm), TL = 85°C
(6)
PM(AV) 6.5 W
Maximum working stand-off voltage VWM 24 V
Peak forward surge current, 8.3ms single half sine-wave
(3)
IFSM 400 A
Operating junction and storage temperature range TJ, TSTG –65 to +185 °C
Electrical Characteristics (TA = 25°C unless otherwise noted)
Maximum DC reverse leakage current TA = 25°C
ID
1.0
µA
at VWM = 24V TA = 150°C 50
Reverse Breakdown Voltage TA = 25°C min. 26.7
at 100mA TA = 25°C max.
V(BR)
32.6
V
TA = 150°C min. 29.7
TA = 150°C max. 36.7
Maximum clamping voltage TA = 25°C
VC
40
V
at IPP = 90A
(4)
TA = 150°C 45
Maximum instantaneous forward voltage at 100A
(5)
VF 1.8 V
Notes: (1) Non-repetitive current pulse, per Fig. 2, with a 10/1000µs waveform (4) Measured on 80µs square pulse width
(2) Non-repetitive current pulse, per Fig. 5, with a 10µs/50ms waveform (5) Measured on 300µs second square pulse width
(3) Measured on 8.3ms half sine-wave, or equivalent square wave, (6) Mounted on copper pad area of 1.6 x 1.6”
duty cycle = 4 pulses maximum (40 x 40mm) per Fig. 5
P600
Dimensions in inches and (millimeters)
1.0 (25.4) MIN.
0.340 (8.6)
1.0 (25.4)
0.360 (9.1)
0.340 (8.6)
0.052 (1.32)
0.360 (9.1)
0.048 (1.22)
MIN.
DIA.
Peak Pulse Power: 6000W (10/1000µs)
6KA24
Features
Designed for under the hood applications
Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
Exclusive patented PAR® oxide passivated chip
construction
Low incremental surge resistance
Ideally suited for automotive “load dump”
applications
High temp. soldering guaranteed: 300°C/10 seconds,
0.375" (9.5mm) lead length, 5lbs. (2.3 kg) tension
Available in unidirectional only
Mechanical data
Case: Molded plastic body over nitride passivated die
Terminals: Axial leads solderable per MIL-STD-750,
Method 2026
Polarity: Color band denotes postitive end (cathode)
Weight: 0.07 oz., 2.1 g
Mounting Position: Any
Automotive Transient Voltage Supressor
www.comchiptech.com
COMCHIP
MDS0305003A Page 1
Maximum Ratings and Thermal Characteristics (TA = 25°C unless otherwise noted)
Parameter Symbol Limit Unit
Peak pulse power dissipation w/ 10/1000µs waveform
(1)
PPPM 6000 W
Peak pulse power dissipation w/ 10µs/50ms waveform
(2)
PPPM 2000 W
Steady state power dissipation
lead lengths 0.375” (9.5mm), TL = 85°C
(6)
PM(AV) 6.5 W
Maximum working stand-off voltage VWM 24 V
Peak forward surge current, 8.3ms single half sine-wave
(3)
IFSM 400 A
Operating junction and storage temperature range TJ, TSTG –65 to +185 °C
Electrical Characteristics (TA = 25°C unless otherwise noted)
Maximum DC reverse leakage current TA = 25°C
ID
1.0
µA
at VWM = 24V TA = 150°C 50
Reverse Breakdown Voltage TA = 25°C min. 26.7
at 100mA TA = 25°C max.
V(BR)
32.6
V
TA = 150°C min. 29.7
TA = 150°C max. 36.7
Maximum clamping voltage TA = 25°C
VC
40
V
at IPP = 90A
(4)
TA = 150°C 45
Maximum instantaneous forward voltage at 100A
(5)
VF 1.8 V
Notes: (1) Non-repetitive current pulse, per Fig. 2, with a 10/1000µs waveform (4) Measured on 80µs square pulse width
(2) Non-repetitive current pulse, per Fig. 5, with a 10µs/50ms waveform (5) Measured on 300µs second square pulse width
(3) Measured on 8.3ms half sine-wave, or equivalent square wave, (6) Mounted on copper pad area of 1.6 x 1.6”
duty cycle = 4 pulses maximum (40 x 40mm) per Fig. 5
P600
Dimensions in inches and (millimeters)
1.0 (25.4) MIN.
0.340 (8.6)
1.0 (25.4)
0.360 (9.1)
0.340 (8.6)
0.052 (1.32)
0.360 (9.1)
0.048 (1.22)
MIN.
DIA.