AH101
器件资料摘要：
WJ Communications, Inc. • Phone: 1-800-WJ1-4401 • FAX: 408-577-6620 • e-mail: sales@wj.com • Web site: www.wj.com March 2002
AH101
Product Description
The AH101 is a medium power gain block that
offers excellent dynamic range in a low cost sur-
face mount package. The combination of a sin-
gle supply voltage and an unconditionally sta-
ble internally matched device, makes it ideal for
both narrow band and broadband applications.
Superior thermal design allows the product to
achieve +45 dBm OIP3 performance at a
mounting temperature of +85°C with an asso-
ciated MTBF of >100 years
3
.
Product Features
•
50-1500 MHz
•
+45 dBm Output IP3
•
13 dB Gain
•
+27 dBm P1dB
•
MTBF >100 Years
•
Unconditionally Stable
•
Internally Matched
•
Single Bias Supply
(+7.0 to +9.0 V)
Functional Diagram
4
123
Function Pin No.
Input 1
Ground 2
Output/Bias 3
Ground 4
Medium Power, High Linearity Amplifier
Recommended Maximum Ratings
Parameter Rating
Operating Case Temperature -40 to +85°C
Storage Temperature -55 to +125°C
DC Voltage +11 V
RF Input Power (continuous) +18 dBm
Operation of this device above any of these parameters may cause permanent damage.
Ordering Information
Part No. Description
AH101 Medium Power High Linearity Amplifier
(Available in tape and reel)
AH101-PCB Fully Assembled Application Circuit
The Communications Edge
™
Advanced Product Information
Specifications
Parameter Units Min. Typical Max.
Frequency Range MHz 50-1500
S21 - Gain dB 12 13.5
S11 - Input Return Loss dB -20
S22 - Output Return Loss dB -13
Output IP3 dBm +43 +47
Output P1dB dBm +27
Noise Figure dB 5.0
Operating Current Range mA 170 200 230
Supply Voltage V 9.0
Test conditions unless otherwise noted.
1. T = 25°C, Vdd = 9.0 V, Frequency = 800 MHz, 50 ohm system.
2. OIP3 measured with two tones at an output power of 8 dBm/tone separated by 10 MHz. The
suppression on the largest IM3 product is used to calculate the OIP3 using a 2:1 slope rule.
3. MTBF calculated with channel temperature at 155˚C.
Typical Parameters
Parameter Units Typical
Frequency MHz 900 1500
S21 dB 13.5 12
S11 dB -20 -12
S22 dB -15 -12
Output IP3 dBm +47 +46
Output P1dB dBm +27.0 +25.0
Noise Figure dB 3.5 4.0
Typical parameters reflect performance in an application curcuit.
Actual Size
AH101
Product Description
The AH101 is a medium power gain block that
offers excellent dynamic range in a low cost sur-
face mount package. The combination of a sin-
gle supply voltage and an unconditionally sta-
ble internally matched device, makes it ideal for
both narrow band and broadband applications.
Superior thermal design allows the product to
achieve +45 dBm OIP3 performance at a
mounting temperature of +85°C with an asso-
ciated MTBF of >100 years
3
.
Product Features
•
50-1500 MHz
•
+45 dBm Output IP3
•
13 dB Gain
•
+27 dBm P1dB
•
MTBF >100 Years
•
Unconditionally Stable
•
Internally Matched
•
Single Bias Supply
(+7.0 to +9.0 V)
Functional Diagram
4
123
Function Pin No.
Input 1
Ground 2
Output/Bias 3
Ground 4
Medium Power, High Linearity Amplifier
Recommended Maximum Ratings
Parameter Rating
Operating Case Temperature -40 to +85°C
Storage Temperature -55 to +125°C
DC Voltage +11 V
RF Input Power (continuous) +18 dBm
Operation of this device above any of these parameters may cause permanent damage.
Ordering Information
Part No. Description
AH101 Medium Power High Linearity Amplifier
(Available in tape and reel)
AH101-PCB Fully Assembled Application Circuit
The Communications Edge
™
Advanced Product Information
Specifications
Parameter Units Min. Typical Max.
Frequency Range MHz 50-1500
S21 - Gain dB 12 13.5
S11 - Input Return Loss dB -20
S22 - Output Return Loss dB -13
Output IP3 dBm +43 +47
Output P1dB dBm +27
Noise Figure dB 5.0
Operating Current Range mA 170 200 230
Supply Voltage V 9.0
Test conditions unless otherwise noted.
1. T = 25°C, Vdd = 9.0 V, Frequency = 800 MHz, 50 ohm system.
2. OIP3 measured with two tones at an output power of 8 dBm/tone separated by 10 MHz. The
suppression on the largest IM3 product is used to calculate the OIP3 using a 2:1 slope rule.
3. MTBF calculated with channel temperature at 155˚C.
Typical Parameters
Parameter Units Typical
Frequency MHz 900 1500
S21 dB 13.5 12
S11 dB -20 -12
S22 dB -15 -12
Output IP3 dBm +47 +46
Output P1dB dBm +27.0 +25.0
Noise Figure dB 3.5 4.0
Typical parameters reflect performance in an application curcuit.
Actual Size