1N5624
器件描述：GLASS PASSIVATED JUNCTION RECTIFIER
器件厂商：GE [General Semiconductor]
文件大小：52.31KB，共2页
Sponsor by e络盟器件资料摘要：
4/98
1N5624 THRU 1N5627
GLASS PASSIVATED JUNCTION RECTIFIER
Reverse Voltage - 200 to 800 Volts Forward Current - 3.0 Amperes
FEATURES
♦ Glass passivated cavity-free junction
♦ High temperature metallurgically bonded
constructed
♦ Hermetically sealed package
♦ Capable of meeting
environmental
standards of
MIL-S-19500
♦ Typical IR less than 0.1µA
♦ 3.0 Ampere operation at TA=70°C with no thermal
runaway
♦ High temperature soldering guaranteed:
350°C/10 seconds, 0.375" (9.5mm) lead length,
5 lbs. (2.3kg) tension
MECHANICAL DATA
Case: Solid glass body
Terminals: Solder plated axial leads, solderable per
MIL-STD-750, Method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight: 0.04 ounce, 1.1 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
SYMBOLS 1N5624 1N5625 1N5626 1N5627 UNITS
*Maximum repetitive peak reverse voltage VRRM 200 400 600 800 Volts
Maximum RMS voltage VRMS 140 280 420 560 Volts
*Maximum DC blocking voltage VDC 200 400 600 800 Volts
*Maximum average forward rectified current
0.375" (9.5mm) lead length at TA=70°C
I(AV 3.0 Amps
Peak forward surge current 8.3ms single half sine-wave
superimposed on rated load (JEDEC Method)
IFSM 125.0 Amps
*Maximum instantaneous forward voltage at 3.0A
TA=25°C VF 1.0 Volts
TA=70°C 0.95
*Maximum DC reverse current TA=25°C 5.0
at rated DC blocking voltage TA=175°C
IR
300.0 200.0
µA
*Maximum full load reverse current, full cycle average,
0.375" (9.5mm) lead length at TA=70°C
IR(AV) 150.0 100.0 µA
Typical junction capacitance (NOTE 1) CJ 40.0 pF
Typical thermal resistance (NOTE 2) RΘJA 20.0
°C/W
RΘJL 10.0
*Operating junction temperature range TJ -65 to +175 °C
*Storage temperature range TSTG -65 to +200 °C
NOTES:
(1) Measured at 1.0 MHZ and applied reverse voltage of 4.0 Volts
(2) Thermal resistance from junction to ambient and from junction to lead at 0.375" (9.5mm) lead length,
with both leads attached between heatsinks
*JEDEC registered values
0.250 (6.3)
0.170 (4.3)
0.052 (1.32)
0.048 (1.22)
DIA.
DIA.
1.0 (25.4)
MIN
MAX.
0.300 (7.6)
1.0 (25.4)
MIN
CASE STYLE G3
Dimensions in inches and (millimeters)
*Brazed-lead assembly is covered by Patent No. 3,930,306
P
A
TENTED*
1N5624 THRU 1N5627
GLASS PASSIVATED JUNCTION RECTIFIER
Reverse Voltage - 200 to 800 Volts Forward Current - 3.0 Amperes
FEATURES
♦ Glass passivated cavity-free junction
♦ High temperature metallurgically bonded
constructed
♦ Hermetically sealed package
♦ Capable of meeting
environmental
standards of
MIL-S-19500
♦ Typical IR less than 0.1µA
♦ 3.0 Ampere operation at TA=70°C with no thermal
runaway
♦ High temperature soldering guaranteed:
350°C/10 seconds, 0.375" (9.5mm) lead length,
5 lbs. (2.3kg) tension
MECHANICAL DATA
Case: Solid glass body
Terminals: Solder plated axial leads, solderable per
MIL-STD-750, Method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight: 0.04 ounce, 1.1 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
SYMBOLS 1N5624 1N5625 1N5626 1N5627 UNITS
*Maximum repetitive peak reverse voltage VRRM 200 400 600 800 Volts
Maximum RMS voltage VRMS 140 280 420 560 Volts
*Maximum DC blocking voltage VDC 200 400 600 800 Volts
*Maximum average forward rectified current
0.375" (9.5mm) lead length at TA=70°C
I(AV 3.0 Amps
Peak forward surge current 8.3ms single half sine-wave
superimposed on rated load (JEDEC Method)
IFSM 125.0 Amps
*Maximum instantaneous forward voltage at 3.0A
TA=25°C VF 1.0 Volts
TA=70°C 0.95
*Maximum DC reverse current TA=25°C 5.0
at rated DC blocking voltage TA=175°C
IR
300.0 200.0
µA
*Maximum full load reverse current, full cycle average,
0.375" (9.5mm) lead length at TA=70°C
IR(AV) 150.0 100.0 µA
Typical junction capacitance (NOTE 1) CJ 40.0 pF
Typical thermal resistance (NOTE 2) RΘJA 20.0
°C/W
RΘJL 10.0
*Operating junction temperature range TJ -65 to +175 °C
*Storage temperature range TSTG -65 to +200 °C
NOTES:
(1) Measured at 1.0 MHZ and applied reverse voltage of 4.0 Volts
(2) Thermal resistance from junction to ambient and from junction to lead at 0.375" (9.5mm) lead length,
with both leads attached between heatsinks
*JEDEC registered values
0.250 (6.3)
0.170 (4.3)
0.052 (1.32)
0.048 (1.22)
DIA.
DIA.
1.0 (25.4)
MIN
MAX.
0.300 (7.6)
1.0 (25.4)
MIN
CASE STYLE G3
Dimensions in inches and (millimeters)
*Brazed-lead assembly is covered by Patent No. 3,930,306
P
A
TENTED*