4/98
1N5615GP THRU 1N5623GP
GLASS PASSIVATED JUNCTION FAST SWITCHING RECTIFIER
Reverse Voltage - 200 to 1000 Volts Forward Current - 1.0 Ampere
FEATURES
♦ Plastic package has
Underwriters Laboratory
Flammability Classification 94V-0
♦ High temperature metallurgically
bonded construction
♦ Glass passivated cavity-free junction
♦ Capable of meeting environmental standards of
MIL-S-19500
♦ Fast switching for high efficiency
♦ 1.0 Ampere operation at TA=55°C with no thermal
runaway
♦ High temperature soldering guaranteed:
350°C/10seconds, 0.375" (9.5mm) lead length,
5 lbs. (2.3kg) tension
MECHANICAL DATA
Case: JEDEC DO-204AC molded plastic over glass body
Terminals: Plated axial leads, solderable per MIL-STD-750,
Method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight: 0.015 ounce, 0.4 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
1N 1N 1N 1N 1N
SYMBOLS 5615GP 5617GP 5619GP 5621GP 5623GP UNITS
* Maximum repetitive peak reverse voltage VRRM 200 400 600 800 1000 Volts
* Maximum RMS voltage VRMS 140 280 420 560 700 Volts
* Maximum DC blocking voltage VDC 200 400 600 800 1000 Amps
* Maximum average forward rectified current
0.375" (9.5mm) lead length at TA=55°C
I(AV) 1.0 Amp
* Peak forward surge current
8.3ms single half sine-wave superimposed
on rated load (JEDEC Method)
IFSM 50.0 Amps
Maximum instantaneous forward voltage at 1.0A VF 1.2 Volts
Maximum DC reverse current TA=25°C 0.5
at rated DC blocking voltage TA=100°C
IR
25.0
µA
*Maximum reverse recovery time (NOTE 1) trr 150 250 300 500 ns
Typical junction capacitance (NOTE 2) CJ 25.0 pF
Typical thermal resistance (NOTE 3) RΘJA 45.0 °C/W
* Operating junction and storage temperature range TJ,TSTG -65 to +175 °C
NOTES:
(1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A
(2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts
(3) Thermal resistance from junction to ambient at 0.375" (9.5mm) lead length, P.C.B. mounted
* JEDEC registered values
0.034 (0.86)
0.028 (0.71)
0.140 (3.6)
0.104 (2.6)
DIA.
DIA.
1.0
MIN.
(25.4)
0.230 (5.8)
0.300 (7.6)
1.0
MIN.
(25.4)
DO-204AC
Dimensions in inches and (millimeters)
*Glass-plastic encapsulation technique is covered by
Patent No. 3,996,602 and brazed-lead assembly by Patent No. 3,930,306
P
A
TENTED*
®