1N5615
器件描述：GLASS PASSIVATED FAST SWITCHING RECTIFIER
器件厂商：GE [General Semiconductor]
文件大小：52.15KB，共2页
Sponsor by e络盟器件资料摘要：
1N5615 THRU 1N5623
GLASS PASSIVATED FAST SWITCHING RECTIFIER
Reverse Voltage - 200 to 1000 Volts Forward Current - 1.0 Ampere
FEATURES
♦ High temperature metallurgically bonded
construction
♦ Hermetically sealed case
♦ Glass passivated cavity-free junction
♦ 1.0 Ampere operation
at TA=55°C with no
thermal runaway
♦ Typical IR less than 0.1µA
♦ Capable of meeting environmental standards of
MIL-S-19500
♦ Fast switching for high efficiency
♦ High temperature soldering guaranteed:
350°C/10 seconds, 0.375" (9.5mm) lead length,
5 lbs. (2.3kg) tension
MECHANICAL DATA
Case: JEDEC DO-204AP Solid glass body
Terminals: Solder plated axial leads, solderable per
MIL-STD-750, Method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight: 0.02 ounce, 0.56 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
SYMBOLS 1N5615 1N5617 1N5619 1N5621 1N5623 UNITS
*Maximum repetitive peak reverse voltage VRRM 200 400 600 800 1000 Volts
Maximum RMS voltage VRMS 140 280 420 560 700 Volts
*Maximum DC blocking voltage VDC 200 400 600 800 1000 Volts
*Minimum reverse breakdown voltage at 50 µAV(BR) 220 440 660 880 1100 Volts
*Maximum average forward rectified current
0.375” (9.5mm) lead length at TA=55°C
I(AV) 1.0 Amp
*Peak forward surge current
8.3ms single half sine-wave superimposed
on rated load (JEDEC Method)
IFSM 50.0 Amps
*Maximum instantaneous forward voltage at 1.0A VF 1.2 Volts
*Maximum DC reverse current TA=25°C 0.5
at rated DC blocking voltage TA=100°C IR 25.0 µA
TA=200°C 1500.0
*Maximum reverse recovery time (NOTE 1) trr 150 150 250 300 500 ns
*Maximum junction capacitance (NOTE 2)CJ45 35 25 20 15 pF
Typical thermal resistance (NOTE 3) RΘJA 55.0 °C/W
*Operating junction temperature range TJ -65 to +175 °C
*Storage temperature range TSTG -65 to +200 °C
NOTES:
(1) Reverse recovery test conditions IF=0.5A, IR=1.0A, Irr=0.25A
(2) Measured at 1.0 MHZ and applied reverse voltage of 12 Volts
(3) Thermal resistance from junction to ambient at 0.375” (9.5mm) lead length, P.C.B.mounted
*JEDEC registered values
4/98
P
A
TENTED*
0.034 (0.86)
0.028 (0.71)
DIA.
0.150 (3.8)
0.100 (2.5)
DIA.
1.0 (25.4)
MIN.
0.240 (6.1)
MAX.
1.0 (25.4)
MIN.
DO-204AP
Dimensions in inches and (millimeters)
*Brazed-lead assembly is covered by Patent No. 3,930,306
GLASS PASSIVATED FAST SWITCHING RECTIFIER
Reverse Voltage - 200 to 1000 Volts Forward Current - 1.0 Ampere
FEATURES
♦ High temperature metallurgically bonded
construction
♦ Hermetically sealed case
♦ Glass passivated cavity-free junction
♦ 1.0 Ampere operation
at TA=55°C with no
thermal runaway
♦ Typical IR less than 0.1µA
♦ Capable of meeting environmental standards of
MIL-S-19500
♦ Fast switching for high efficiency
♦ High temperature soldering guaranteed:
350°C/10 seconds, 0.375" (9.5mm) lead length,
5 lbs. (2.3kg) tension
MECHANICAL DATA
Case: JEDEC DO-204AP Solid glass body
Terminals: Solder plated axial leads, solderable per
MIL-STD-750, Method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight: 0.02 ounce, 0.56 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
SYMBOLS 1N5615 1N5617 1N5619 1N5621 1N5623 UNITS
*Maximum repetitive peak reverse voltage VRRM 200 400 600 800 1000 Volts
Maximum RMS voltage VRMS 140 280 420 560 700 Volts
*Maximum DC blocking voltage VDC 200 400 600 800 1000 Volts
*Minimum reverse breakdown voltage at 50 µAV(BR) 220 440 660 880 1100 Volts
*Maximum average forward rectified current
0.375” (9.5mm) lead length at TA=55°C
I(AV) 1.0 Amp
*Peak forward surge current
8.3ms single half sine-wave superimposed
on rated load (JEDEC Method)
IFSM 50.0 Amps
*Maximum instantaneous forward voltage at 1.0A VF 1.2 Volts
*Maximum DC reverse current TA=25°C 0.5
at rated DC blocking voltage TA=100°C IR 25.0 µA
TA=200°C 1500.0
*Maximum reverse recovery time (NOTE 1) trr 150 150 250 300 500 ns
*Maximum junction capacitance (NOTE 2)CJ45 35 25 20 15 pF
Typical thermal resistance (NOTE 3) RΘJA 55.0 °C/W
*Operating junction temperature range TJ -65 to +175 °C
*Storage temperature range TSTG -65 to +200 °C
NOTES:
(1) Reverse recovery test conditions IF=0.5A, IR=1.0A, Irr=0.25A
(2) Measured at 1.0 MHZ and applied reverse voltage of 12 Volts
(3) Thermal resistance from junction to ambient at 0.375” (9.5mm) lead length, P.C.B.mounted
*JEDEC registered values
4/98
P
A
TENTED*
0.034 (0.86)
0.028 (0.71)
DIA.
0.150 (3.8)
0.100 (2.5)
DIA.
1.0 (25.4)
MIN.
0.240 (6.1)
MAX.
1.0 (25.4)
MIN.
DO-204AP
Dimensions in inches and (millimeters)
*Brazed-lead assembly is covered by Patent No. 3,930,306