1N5415
器件描述：GLASS PASSIVATED FAST SWITCHING RECTIFIER
器件厂商：GE [General Semiconductor]
文件大小：52.77KB，共2页
Sponsor by e络盟器件资料摘要：
1N5415 THRU 1N5420
GLASS PASSIVATED FAST SWITCHING RECTIFIER
Reverse Voltage - 50 to 600 Volts Forward Current - 3.0 Amperes
FEATURES
♦ Glass passivated cavity-free junction
♦ High temperature metallurgically bonded construction
♦ Hermetically sealed package
♦ Capable of meeting
environmental
standards of
MIL-S-19500
♦ Fast switching for
high efficiency
♦ High temperature soldering guaranteed:
350°C/10 seconds, 0.375" (9.5mm) lead length,
5 lbs. (2.3kg) tension
MECHANICAL DATA
Case: Solid glass body
Terminals: Solder plated axial leads, solderable per
MIL-STD-750, Method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight: 0.037 ounce, 1.04 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
SYMBOLS 1N5415 1N5416 1N5417 1N5418 1N5419 1N5420 UNITS
*Maximum repetitive peak reverse voltage VRRM 50 100 200 400 500 600 Volts
Maximum RMS voltage VRMS 35 70 140 280 350 420 Volts
*Maximum DC blocking voltage VDC 50 100 200 400 500 600 Volts
*Minimum reverse breakdown voltage at 50µAVBR 55 110 220 440 550 660 Volts
*Maximum average forward rectified current
0.375” (9.5mm) lead lengths atTA=55°C
I(AV) 3.0 Amps
Peak forward surge current
8.3ms single half sine-wave superimposed
on rated load (JEDEC Method) at TA=100°C
IFSM 80.0 Amps
Maximum instantaneous forward voltage at 3.0A* 1.10
9.0A
VF
1.50
Volts
Maximum DC reverse current *TA=25°C 1.0
at rated DC blocking voltage TA=100°C IR 20.0 µA
*TA=175°C 2.0
*Maximum reverse recovery time (NOTE 1) trr 150 250 400 ns
*Maximum junction capacitance (NOTE 2) CJ 200 175 150 120 110 100 pF
Typical thermal resistance (NOTE3) RΘJA 22.0 °C/W
*Operating and storage temperature range TJ,TSTG -65 to +175 °C
NOTES:
(1) Reverse recovery test conditions: IF=0.5A, IR= 1.0A, Irr=0.25A
(2) Measured at 1.0 MHZ and applied reverse voltage of 12.0 Volts
(3) Thermal resistance from junction to ambient at 0.375" (9.5mm) lead length, with both leads to heat sink
*JEDEC registered values
4/98
P
A
TENTED*
0.180 (4.6)
0.115 (2.9)
0.042 (1.07)
0.038 (0.962)
DIA.
DIA.
MAX.
0.300 (7.6)
1.0 (25.4)
MIN.
1.0 (25.4)
MIN.
Case Style G4
Dimensions in inches and (millimeters)
*Brazed-lead assembly is covered by Patent No. 3,930,306
GLASS PASSIVATED FAST SWITCHING RECTIFIER
Reverse Voltage - 50 to 600 Volts Forward Current - 3.0 Amperes
FEATURES
♦ Glass passivated cavity-free junction
♦ High temperature metallurgically bonded construction
♦ Hermetically sealed package
♦ Capable of meeting
environmental
standards of
MIL-S-19500
♦ Fast switching for
high efficiency
♦ High temperature soldering guaranteed:
350°C/10 seconds, 0.375" (9.5mm) lead length,
5 lbs. (2.3kg) tension
MECHANICAL DATA
Case: Solid glass body
Terminals: Solder plated axial leads, solderable per
MIL-STD-750, Method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight: 0.037 ounce, 1.04 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
SYMBOLS 1N5415 1N5416 1N5417 1N5418 1N5419 1N5420 UNITS
*Maximum repetitive peak reverse voltage VRRM 50 100 200 400 500 600 Volts
Maximum RMS voltage VRMS 35 70 140 280 350 420 Volts
*Maximum DC blocking voltage VDC 50 100 200 400 500 600 Volts
*Minimum reverse breakdown voltage at 50µAVBR 55 110 220 440 550 660 Volts
*Maximum average forward rectified current
0.375” (9.5mm) lead lengths atTA=55°C
I(AV) 3.0 Amps
Peak forward surge current
8.3ms single half sine-wave superimposed
on rated load (JEDEC Method) at TA=100°C
IFSM 80.0 Amps
Maximum instantaneous forward voltage at 3.0A* 1.10
9.0A
VF
1.50
Volts
Maximum DC reverse current *TA=25°C 1.0
at rated DC blocking voltage TA=100°C IR 20.0 µA
*TA=175°C 2.0
*Maximum reverse recovery time (NOTE 1) trr 150 250 400 ns
*Maximum junction capacitance (NOTE 2) CJ 200 175 150 120 110 100 pF
Typical thermal resistance (NOTE3) RΘJA 22.0 °C/W
*Operating and storage temperature range TJ,TSTG -65 to +175 °C
NOTES:
(1) Reverse recovery test conditions: IF=0.5A, IR= 1.0A, Irr=0.25A
(2) Measured at 1.0 MHZ and applied reverse voltage of 12.0 Volts
(3) Thermal resistance from junction to ambient at 0.375" (9.5mm) lead length, with both leads to heat sink
*JEDEC registered values
4/98
P
A
TENTED*
0.180 (4.6)
0.115 (2.9)
0.042 (1.07)
0.038 (0.962)
DIA.
DIA.
MAX.
0.300 (7.6)
1.0 (25.4)
MIN.
1.0 (25.4)
MIN.
Case Style G4
Dimensions in inches and (millimeters)
*Brazed-lead assembly is covered by Patent No. 3,930,306