1N5400
器件描述：STANDARD RECOVERY RECTIFIERS 50-1000 VOLTS 3.0 AMPERE
器件厂商：MOTOROLA [Motorola, Inc]
文件大小：44.85KB，共2页
Sponsor by e络盟器件资料摘要：
1Rectifier Device Data
C0065C0120C0105C0097C0108C0045C0076C0101C0097C0100
C0083C0116C0097C0110C0100C0097C0114C0100 C0082C0101C0099C0111C0118C0101C0114C0121 C0082C0101C0099C0116C0105C0102C0105C0101C0114C0115
Lead mounted standard recovery rectifiers are designed for use in power supplies
and other applications having need of a device with the following features:
• High Current to Small Size
• High Surge Current Capability
• Low Forward Voltage Drop
• Void–Free Economical Plastic Package
• Available in Volume Quantities
Mechanical Characteristics
• Case: Epoxy, Molded
• Weight: 1.1 gram (approximately)
• Finish: All External Surfaces Corrosion Resistant and Terminal Leads are
Readily Solderable
• Lead and Mounting Surface Temperature for Soldering Purposes:
220°C Max. for 10 Seconds, 1/16″ from case
• Shipped in plastic bags, 5,000 per bag.
• Available Tape and Reeled, 1500 per reel, by adding a “RL” suffix to the
part number
• Polarity: Cathode Indicated by Polarity Band
• Marking: 1N5400, 1N5401, 1N5402, 1N5404, 1N5406, 1N5407, 1N5408
MAXIMUM RATINGS
Rating Symbol 1N5400 1N5401 1N5402 1N5404 1N5406 1N5407 1N5408 Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
V
RRM
V
RWM
V
R
50 100 200 400 600 800 1000 Volts
Non–repetitive Peak Reverse Voltage V
RSM
100 200 300 525 800 1000 1200 Volts
Average Rectified Forward Current
(Single Phase Resistive Load,
1/2″ Leads, T
L
= 105°C)
I
O
3.0 Amp
Non–repetitive Peak Surge Current
(Surge Applied at Rated Load Conditions)
I
FSM
200 (one cycle) Amp
Operating and Storage Junction
Temperature Range
T
J
T
stg
– 65 to +170
– 65 to +175
°C
THERMAL CHARACTERISTICS
Characteristic Symbol Typ Unit
Thermal Resistance, Junction to Ambient (PC Board Mount, 1/2″ Leads) R
θJA
53 °C/W
ELECTRICAL CHARACTERISTICS
Characteristic Symbol Min Typ Max Unit
*Instantaneous Forward Voltage (1)
(i
F
= 9.4 Amp)
v
F
— — 1.2 Volts
Average Reverse Current (1)
DC Reverse Current (Rated dc Voltage, T
L
= 80°C)
I
R(AV)
I
R
—
—
—
—
500
500
µA
* JEDEC Registered Data.
(1) Measured in a single phase halfwave circuit such as shown in Figure 6.25 of EIA RS–282, November 1963. Operated at rated load conditions
T
L
= 80°C, I
O
= 3.0 A, V
r
= V
RWM
.
Preferred devices are Motorola recommended choices for future use and best overall value.
Ratings at 25°C ambient temperature unless otherwise specified.
60 Hz resistive or inductive loads.
For capacitive load, derate current by 20%.
Motorola, Inc. 1996
Order this document
by 1N5400/D
C0077C0079C0084C0079C0082C0079C0076C0065
SEMICONDUCTOR TECHNICAL DATA
C0049C0078C0053C0052C0048C0048
C0116C0104C0114C0117
C0049C0078C0053C0052C0048C0056
STANDARD
RECOVERY RECTIFIERS
50–1000 VOLTS
3.0 AMPERE
CASE 267–03
1N5404 and 1N5406 are
Motorola Preferred Devices
Rev 2
C0065C0120C0105C0097C0108C0045C0076C0101C0097C0100
C0083C0116C0097C0110C0100C0097C0114C0100 C0082C0101C0099C0111C0118C0101C0114C0121 C0082C0101C0099C0116C0105C0102C0105C0101C0114C0115
Lead mounted standard recovery rectifiers are designed for use in power supplies
and other applications having need of a device with the following features:
• High Current to Small Size
• High Surge Current Capability
• Low Forward Voltage Drop
• Void–Free Economical Plastic Package
• Available in Volume Quantities
Mechanical Characteristics
• Case: Epoxy, Molded
• Weight: 1.1 gram (approximately)
• Finish: All External Surfaces Corrosion Resistant and Terminal Leads are
Readily Solderable
• Lead and Mounting Surface Temperature for Soldering Purposes:
220°C Max. for 10 Seconds, 1/16″ from case
• Shipped in plastic bags, 5,000 per bag.
• Available Tape and Reeled, 1500 per reel, by adding a “RL” suffix to the
part number
• Polarity: Cathode Indicated by Polarity Band
• Marking: 1N5400, 1N5401, 1N5402, 1N5404, 1N5406, 1N5407, 1N5408
MAXIMUM RATINGS
Rating Symbol 1N5400 1N5401 1N5402 1N5404 1N5406 1N5407 1N5408 Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
V
RRM
V
RWM
V
R
50 100 200 400 600 800 1000 Volts
Non–repetitive Peak Reverse Voltage V
RSM
100 200 300 525 800 1000 1200 Volts
Average Rectified Forward Current
(Single Phase Resistive Load,
1/2″ Leads, T
L
= 105°C)
I
O
3.0 Amp
Non–repetitive Peak Surge Current
(Surge Applied at Rated Load Conditions)
I
FSM
200 (one cycle) Amp
Operating and Storage Junction
Temperature Range
T
J
T
stg
– 65 to +170
– 65 to +175
°C
THERMAL CHARACTERISTICS
Characteristic Symbol Typ Unit
Thermal Resistance, Junction to Ambient (PC Board Mount, 1/2″ Leads) R
θJA
53 °C/W
ELECTRICAL CHARACTERISTICS
Characteristic Symbol Min Typ Max Unit
*Instantaneous Forward Voltage (1)
(i
F
= 9.4 Amp)
v
F
— — 1.2 Volts
Average Reverse Current (1)
DC Reverse Current (Rated dc Voltage, T
L
= 80°C)
I
R(AV)
I
R
—
—
—
—
500
500
µA
* JEDEC Registered Data.
(1) Measured in a single phase halfwave circuit such as shown in Figure 6.25 of EIA RS–282, November 1963. Operated at rated load conditions
T
L
= 80°C, I
O
= 3.0 A, V
r
= V
RWM
.
Preferred devices are Motorola recommended choices for future use and best overall value.
Ratings at 25°C ambient temperature unless otherwise specified.
60 Hz resistive or inductive loads.
For capacitive load, derate current by 20%.
Motorola, Inc. 1996
Order this document
by 1N5400/D
C0077C0079C0084C0079C0082C0079C0076C0065
SEMICONDUCTOR TECHNICAL DATA
C0049C0078C0053C0052C0048C0048
C0116C0104C0114C0117
C0049C0078C0053C0052C0048C0056
STANDARD
RECOVERY RECTIFIERS
50–1000 VOLTS
3.0 AMPERE
CASE 267–03
1N5404 and 1N5406 are
Motorola Preferred Devices
Rev 2