1N5391 THRU 1N5399
GENERAL PURPOSE PLASTIC RECTIFIER
Reverse Voltage - 50 to 1000 Volts Forward Current - 1.5 Amperes
FEATURES
♦ Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
♦ High surge current capability
♦ 1.5 Ampere operation at TL=70°C
with no thermal runaway
♦ Low reverse leakage
♦ Construction utilizes
void-free molded plastic technique
♦ High temperature soldering guaranteed:
250°C/10 seconds, 0.375" (9.5mm) lead length,
5 lbs. (2.3kg) tension
MECHANICAL DATA
Case: JEDEC DO-204AL molded plastic body
Terminals: Plated axial leads, solderable per MIL-STD-750,
Method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight: 0.012 ounce, 0.3 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
1N 1N 1N 1N 1N 1N 1N 1N 1N
SYMBOLS 5391 5392 5393 5394 5395 5396 5397 5398 5399 UNITS
*Maximum repetitive peak reverse voltage VRRM 50 100 200 300 400 500 600 800 1000 Volts
*Maximum RMS voltage VRMS 35 70 140 210 280 350 420 560 700 Volts
*Maximum DC blocking voltage VDC 50 100 200 300 400 500 600 800 1000 Volts
*Maximum average forward rectified current
0.500” (12.7mm) lead length at TL=70°C
I(AV) 1.5 Amps
*Peak forward surge current
8.3ms single half sine-wave superimposed on
rated load (JEDEC Method) at TA=75°C
IFSM 50.0 Amps
*Maximum instantaneous forward voltage
at 1.5A TA=70°C
VF 1.4 Volts
*Maximum DC reverse current TA=25°C 5.0
at rated DC blocking voltage TA=150°C
IR
300.0
µA
*Maximum full load reverse current full cycle
average, 0.375",(9.5mm) lead length at TL=70°C
IR(AV) 300.0 µA
Typical reverse recovery time (NOTE 1) trr 2.0 µs
Typical junction capacitance (NOTE 2) CJ 15.0 pF
Typical thermal resistance (NOTE 3) RΘJA 50.0
RΘJL 25.0
°C/W
*Maximum DC blocking voltage temperature TA +150 °C
*Operating junction temperature range TJ -50 to + 170 °C
*Storage temperature range TSTG -50 to+175 °C
NOTES:
(1) Measured with IF=0.5A, IR=0.1A, Irr= 0.25A
(2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts
(3) Thermal resistance from junction to ambient and from junction to lead at 0.375” (9.5mm) lead length, P.C.B. mounted
*JEDEC registered value
4/98
0.107 (2.7)
0.080 (2.0)
0.034 (0.86)
0.028 (0.71)
DIA.
1.0 (25.4)
MIN.
1.0 (25.4)
MIN.
0.205 (5.2)
0.160 (4.1)
DIA.
DO-204AL
Dimensions in inches and (millimeters)