1N5059
器件描述：GLASS PASSIVATED JUNCTION RECTIFIER
器件厂商：GE [General Semiconductor]
文件大小：52.73KB，共2页
Sponsor by e络盟器件资料摘要：
1N5059 THRU 1N5062
GLASS PASSIVATED JUNCTION RECTIFIER
Reverse Voltage - 200 to 800 Volts Forward Current - 1. 0 Ampere
FEATURES
♦ High temperature metallurgically bonded
construction
♦ 1.0 Ampere operation at TA=75°C
with no thermal runaway
♦ Typical IR less than 0.1µA
♦ Hermetically sealed package
♦ Glass passivated cavity-free junction
♦ Capable of meeting environmental standards of
MIL-S-19500
♦ High temperature soldering guaranteed:
350°C/10 seconds 0.375” (9.5mm) lead length,
5 lbs. (2.3kg) tension
MECHANICAL DATA
Case:JEDEC DO-204AP solid glass body
Terminals: Solder plated axial leads, solderable per
MIL-STD-750, Method 2026
Polarity: Color band denotes cathode end
Weight: 0.02 ounce, 0.56 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
SYMBOLS 1N5059 1N5060 1N5061 1N5062 UNITS
* Maximum repetitive peak reverse voltage VRRM 200 400 600 800 Volts
Maximum RMS voltage VRMS 140 280 420 560 Volts
* Maximum DC blocking voltage VDC 200 400 600 800 Volts
* Maximum average forward rectified current
0.375” (9.5mm) lead length at TA=75°C
I(AV) 1.0 Amp
* Peak forward surge current
8.3ms single half sine-wave superimposed IFSM 50.0 Amps
on rated load (JEDEC Method)
* Maximum instantaneous forward voltage at 1.0A VF 1.2 Volts
* Maximum full Load reverse current, full cycle
average 0.375” (9.5mm) TA=25°C
5.0
lead length at TA=75°C
IR(AV)
150 100
µA
* Maximum DC reverse current TA=25°C 5.0
at rated DC blocking voltage TA=175°C
IR
300 200
µA
Typical reverse recovery time (NOTE 1) trr 1.5 µs
Typical junction capacitance (NOTE 2) CJ 15.0 pF
Typical thermal resistance (NOTE 3) RΘJA 55.0 °C/W
* Operating junction and storage temperature range TJ, TSTG -65 to +175 °C
NOTES:
(1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, lrr=0.25A
(2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts
(3) Thermal resistance from junction to ambient at 0.375” (9.5mm) lead length P.C.B. mounted
*JEDEC registered values
4/98
DO-204AP
0.034 (0.86)
0.028 (0.71)
DIA.
0.150 (3.8)
0.100 (2.5)
DIA.
1.0 (25.4)
MIN.
0.240 (6.1)
MAX.
1.0 (25.4)
MIN.
Dimensions in inches and (millimeters)
*Brazed-lead assembly is covered by Patent No. 3,930,306
P
A
TENTED*
GLASS PASSIVATED JUNCTION RECTIFIER
Reverse Voltage - 200 to 800 Volts Forward Current - 1. 0 Ampere
FEATURES
♦ High temperature metallurgically bonded
construction
♦ 1.0 Ampere operation at TA=75°C
with no thermal runaway
♦ Typical IR less than 0.1µA
♦ Hermetically sealed package
♦ Glass passivated cavity-free junction
♦ Capable of meeting environmental standards of
MIL-S-19500
♦ High temperature soldering guaranteed:
350°C/10 seconds 0.375” (9.5mm) lead length,
5 lbs. (2.3kg) tension
MECHANICAL DATA
Case:JEDEC DO-204AP solid glass body
Terminals: Solder plated axial leads, solderable per
MIL-STD-750, Method 2026
Polarity: Color band denotes cathode end
Weight: 0.02 ounce, 0.56 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
SYMBOLS 1N5059 1N5060 1N5061 1N5062 UNITS
* Maximum repetitive peak reverse voltage VRRM 200 400 600 800 Volts
Maximum RMS voltage VRMS 140 280 420 560 Volts
* Maximum DC blocking voltage VDC 200 400 600 800 Volts
* Maximum average forward rectified current
0.375” (9.5mm) lead length at TA=75°C
I(AV) 1.0 Amp
* Peak forward surge current
8.3ms single half sine-wave superimposed IFSM 50.0 Amps
on rated load (JEDEC Method)
* Maximum instantaneous forward voltage at 1.0A VF 1.2 Volts
* Maximum full Load reverse current, full cycle
average 0.375” (9.5mm) TA=25°C
5.0
lead length at TA=75°C
IR(AV)
150 100
µA
* Maximum DC reverse current TA=25°C 5.0
at rated DC blocking voltage TA=175°C
IR
300 200
µA
Typical reverse recovery time (NOTE 1) trr 1.5 µs
Typical junction capacitance (NOTE 2) CJ 15.0 pF
Typical thermal resistance (NOTE 3) RΘJA 55.0 °C/W
* Operating junction and storage temperature range TJ, TSTG -65 to +175 °C
NOTES:
(1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, lrr=0.25A
(2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts
(3) Thermal resistance from junction to ambient at 0.375” (9.5mm) lead length P.C.B. mounted
*JEDEC registered values
4/98
DO-204AP
0.034 (0.86)
0.028 (0.71)
DIA.
0.150 (3.8)
0.100 (2.5)
DIA.
1.0 (25.4)
MIN.
0.240 (6.1)
MAX.
1.0 (25.4)
MIN.
Dimensions in inches and (millimeters)
*Brazed-lead assembly is covered by Patent No. 3,930,306
P
A
TENTED*