22 COREY STREET, MELROSE, MASSACHUSETTS 02176
PHONE (781) 665-1071 FAX (781) 665-7379
WEBSITE: http://www.cdi-diodes.com E-mail: mail@cdi-diodes.com
MILLIMETERS INCHES
DIM MIN MAX MIN MAX
D 1.60 1.70 0.063 0.067
F 0.41 0.55 0.016 0.022
G 3.30 3.70 .130 .146
G1 2.54 REF. .100 REF.
S 0.03 MIN. .001 MIN.
FIGURE 1
DESIGN DATA
CASE: DO-213AA, Hermetically sealed
glass case. (MELF, SOD-80, LL34)
LEAD FINISH: Tin / Lead
POLARITY: Diode to be operated with
the banded (cathode) end positive.
MOUNTING POSITION: Any.
MOUNTING SURFACE SELECTION:
The Axial Coefficient of Expansion
(COE) Of this Device is Approximately
+6PPM/°C. The COE of the Mounting
Surface System Should Be Selected To
Provide ASuitable Match With This
Device.
NOTE 1 The maximum allowable change observed over the entire temperature range
i.e.,the diode voltage will not exceed the specified mV at any discrete
temperature between the established limits, per JEDEC standard No.5.
NOTE 2 Zener impedance is derived by superimposing on l
ZT
A60Hz rms a.c. current
equal to 10% of l
ZT.
•1N4565AUR-1 THRU 1N4584AUR-1 AVAILABLE IN JAN, JANTX, JANTXV AND JANS
PER MIL-PRF-19500/452
• TEMPERATURE COMPENSATED ZENER REFERENCE DIODES
• LEADLESS PACKAGE FOR SURFACE MOUNT
• LOW CURRENT OPERATING RANGE: 0.5 TO 4.0 mA
• METALLURGICALLYBONDED, DOUBLE PLUG CONSTRUCTION
1N4565AUR-1 thru 1N4584AUR-1
and
CDLL4565 thru CDLL4584A
CDI ZENER EFFECTIVE VOLTAGE TEMPERATURE MAX.DYNAMIC
TYPE TEST TEMPERATURE TEMPERATURE RANGE ZENER
NUMBER CURRENT COEFFICIENT STABILITY IMPEDANCE
l
ZT
∆V
ZT
MAX Z
ZT
-55°to + 100°
(Note 1) (Note 2)
mA %/°C mV °C OHMS
CDLL4565 .5 .01 48 0 to + 75°C 200
CDLL4565A .5 .01 100 -55 to + 100°C 200
CDLL4566 .5 .005 24 0 to + 75°C 200
CDLL4566A .5 .005 50 -55 to + 100°C 200
CDLL4567 .5 .002 10 0 to + 75°C 200
CDLL4567A .5 .002 20 -55 to + 100°C 200
CDLL4568 .5 .001 5 0 to + 75°C 200
CDLL4568A .5 .001 10 -55 to + 100°C 200
CDLL4569 .5 .0005 2.5 0 to + 75°C 200
CDLL4569A .5 .0005 5 -55 to + 100°C 200
CDLL4570 1.0 .01 48 0 to + 75°C 100
CDLL4570A 1.0 .01 100 -55 to + 100°C 100
CDLL4571 1.0 .005 24 0 to + 75°C 100
CDLL4571A 1.0 .005 50 -55 to + 100°C 100
CDLL4572 1.0 .002 10 0 to + 75°C 100
CDLL4572A 1.0 .002 20 -55 to + 100°C 100
CDLL4573 1.0 .001 5 0 to + 75°C 100
CDLL4573A 1.0 .001 10 -55 to + 100°C 100
CDLL4574 1.0 .0005 2.5 0 to + 75°C 100
CDLL4574A 1.0 .0005 5 -55 to + 100°C 100
CDLL4575 2.0 .01 48 0 to + 75°C 50
CDLL4575A 2.0 .01 100 -55 to + 100°C 50
CDLL4576 2.0 .005 24 0 to + 75°C 50
CDLL4576A 2.0 .005 50 -55 to + 100°C 50
CDLL4577 2.0 .002 10 0 to + 75°C 50
CDLL4577A 2.0 .002 20 -55 to + 100°C 50
CDLL4578 2.0 .001 5 0 to + 75°C 50
CDLL4578A 2.0 .001 10 -55 to + 100°C 50
CDLL4579 2.0 .0005 2.5 0 to + 75°C 50
CDLL4579A 2.0 .0005 5 -55 to + 100°C 50
CDLL4580 4.0 .01 48 0 to + 75°C 25
CDLL4580A 4.0 .01 100 -55 to + 100°C 25
CDLL4581 4.0 .005 24 0 to + 75°C 25
CDLL4581A 4.0 .005 50 -55 to + 100°C 25
CDLL4582 4.0 .002 10 0 to + 75°C 25
CDLL4582A 4.0 .002 20 -55 to + 100°C 25
CDLL4583 4.0 .001 5 0 to + 75°C 25
CDLL4583A 4.0 .001 10 -55 to + 100°C 25
CDLL4584 4.0 .0005 2.5 0 to + 75°C 25
CDLL4584A 4.0 .0005 5 -55 to + 100°C 25
MAXIMUM RATINGS
Operating Temperature: -65°C to +175°C
Storage Temperature: -65°C to +175°C
DC Power Dissipation: 500mW @ +50°C
Power Derating: 4 mW / °C above +50°C
REVERSE LEAKAGE CURRENT
lR = 2µA@ 25°C & VR = 3Vdc
ELECTRICALCHARACTERISTICS @ 25°C, unless otherwise specified.