1N4001 THRU 1N4007
GENERAL PURPOSE PLASTIC RECTIFIER
Reverse Voltage - 50 to 1000 Volts Forward Current - 1.0 Ampere
FEATURES
♦ The plastic package carries Underwriters Laboratory
Flammability Classification 94V-0
♦ Construction utilizes void-free
molded plastic technique
♦ Low reverse leakage
♦ High forward surge current capability
♦ High temperature soldering guaranteed:
250°C/10 seconds, 0.375" (9.5mm) lead length,
5 lbs. (2.3kg) tension
MECHANICAL DATA
Case: JEDEC DO-204AL molded plastic body
Terminals: Plated axial leads, solderable per MIL-STD-750,
Method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight: 0.012 ounce, 0.3 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
1N 1N 1N 1N 1N 1N 1N
SYMBOLS 4001 4002 4003 4004 4005 4006 4007 UNITS
*Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 Volts
*Maximum RMS voltage VRMS 35 70 140 280 420 560 700 Volts
*Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 Volts
*Maximum average forward rectified current
0.375" (9.5mm) lead length at TA=75°C
I(AV) 1.0 Amp
*Peak forward surge current
8.3ms single half sine-wave superimposed on IFSM 30.0 Amps
rated load (JEDEC Method) TA=75°C
*Maximum instantaneous forward voltage at 1.0A VF 1.1 Volts
*Maximum full load reverse current
full cycle average 0.375" (9.5mm) lead length at IR(AV) 30.0 µA
TL=75°C
*Maximum DC reverse current TA= 25°C 5.0
at rated DC blocking voltage TA=100°C
IR
50.0
µA
Typical reverse recovery time (NOTE 1) trr 30.0 µs
Typical junction capacitance (NOTE 2) CJ 15.0 pF
Typical thermal resistance (NOTE 3) RΘJA 50.0
RΘJL 25.0
°C/W
Maximum DC blocking voltage temperature TA +150 °C
*Operating junction and storage temperature range TJ, TSTG -50 to +175 °C
NOTES:
(1) Measured on Tektronix Type "S" recovery plug-in. Tektronix 545 Scope or equivalent, IFM=20mA, IRM=1mA
(2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts
(3) Thermal resistance from junction to ambient and from junction to lead at 0.375" (9.5mm) lead length, P.C.B. mounted
*JEDEC registered value
4/98
0.107 (2.7)
0.080 (2.0)
0.034 (0.86)
0.028 (0.71)
DIA.
1.0 (25.4)
MIN.
1.0 (25.4)
MIN.
0.205 (5.2)
0.160 (4.1)
DIA.
NOTE: Lead diameter is for suffix "E" part numbers
0.026 (0.66)
0.023 (0.58)
DO-204AL
Dimensions in inches and (millimeters)