1F1G THRU 1F7G
GLASS PASSIVATED JUNCTION FAST SWITCHING RECTIFIER
VOLTAGE - 50 to 1000 Volts CURRENT - 1.0 Amperes
FEATURES
z Plastic package has Underwriters Laboratory
Flammability Classification 94V-O Utilizing
Flame Retardant Epoxy Molding Compound
z Glass passivated junction
z 1.0 ampere operation at T
A
=55℃ with no thermal runaway
z Exceeds environmental standards of MIL-S-19500/228
z Fast switching for high efficiency
MECHANICAL DATA
Case: Molded plastic, R-1
Terminals: Plated axial leads, solderable per MIL-STD-202,
Method 208
Polarity: Color band denotes cathode
Mounting Position: Any
Weight: 0.0064 ounce, 0.181 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25℃ ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
1F1G 1F2G 1F3G 1F4G 1F5G 1F6G 1F7G UNITS
Maximum Recurrent Peak Reverse Voltage 50 100 200 400 600 800 1000 V
Maximum RMS Voltage 35 70 140 280 420 560 700 V
Maximum DC Blocking Voltage 50 100 200 400 600 800 1000 V
Maximum Average Forward Rectified Current .375"(9.5mm) lead
length at T
A
=55℃
1.0 A
Peak Forward Surge Current 8.3ms single half sine wave
superimposed on rated load(JECEC method)
30 A
Maximum Forward Voltage at 1.0A 1.3 V
Maximum Full Load Reverse Current Full Cycle
Average, .375”,9.5mm Lead Length at T
A
=55℃
10.0μA
Maximum DC Reverse Current
at Rated DC Blocking Voltage T
A
=100℃
150μA
Maximum Reverse Recovery Time(Note 1) 150 150 150 150 250 500 500 ns
Typical Junction capacitance (Note 2) 15
P
F
Typical Thermal Resistance (Note 3) RΘJA 67℃/W
Operating and Storage Temperature Range T
J
-55 to +150℃
NOTES:
1. Measured with I
F
=.5A, I
R
=1A, I
rr
=.25A
2. Measured at 1 MHz and applied reverse voltage of 4.0 VDC
3. Thermal resistance from junction to ambient and from junction to lead at 0.375"(9.5mm) lead length P.C.B.
mounted with 0.22×0.22"(5.5×5.5mm) copper pads
R-1