ATMEGA165
器件描述：8-bit Microcontroller with 16K Bytes In-System Programmable Flash
器件厂商：ATMEL [ATMEL Corporation]
文件大小：169.98KB，共19页
Sponsor by e络盟器件资料摘要：
2573AS–AVR–06/04
Features
High Performance, Low Power AVR
®
8-Bit Microcontroller
Advanced RISC Architecture
–130 Powerful Instructions – Most Single Clock Cycle Execution
–32 x 8 General Purpose Working Registers
–Fully Static Operation
–Up to 16 MIPS Throughput at 16 MHz
–On-Chip 2-cycle Multiplier
Non-volatile Program and Data Memories
–16K bytes of In-System Self-Programmable Flash
Endurance: 10,000 Write/Erase Cycles
–Optional Boot Code Section with Independent Lock Bits
In-System Programming by On-chip Boot Program
True Read-While-Write Operation
–512 bytes EEPROM
Endurance: 100,000 Write/Erase Cycles
–1K byte Internal SRAM
–Programming Lock for Software Security
JTAG (IEEE std. 1149.1 compliant) Interface
–Boundary-scan Capabilities According to the JTAG Standard
–Extensive On-chip Debug Support
–Programming of Flash, EEPROM, Fuses, and Lock Bits through the JTAG Interface
Peripheral Features
–Two 8-bit Timer/Counters with Separate Prescaler and Compare Mode
–One 16-bit Timer/Counter with Separate Prescaler, Compare Mode, and Capture
Mode
–Real Time Counter with Separate Oscillator
–Four PWM Channels
–8-channel, 10-bit ADC
–Programmable Serial USART
–Master/Slave SPI Serial Interface
–Universal Serial Interface with Start Condition Detector
–Programmable Watchdog Timer with Separate On-chip Oscillator
–On-chip Analog Comparator
–Interrupt and Wake-up on Pin Change
Special Microcontroller Features
–Power-on Reset and Programmable Brown-out Detection
–Internal Calibrated Oscillator
–External and Internal Interrupt Sources
–Five Sleep Modes: Idle, ADC Noise Reduction, Power-save, Power-down, and
Standby
I/O and Packages
–53 Programmable I/O Lines
–64-lead TQFP and 64-pad MLF
Speed Grade:
–ATmega165V: 0 - 4 MHz @ 1.8 - 5.5V, 0 - 8 MHz @ 2.7 - 5.5V
–ATmega165: 0 - 8 MHz @ 2.7 - 5.5V, 0 - 16 MHz @ 4.5 - 5.5V
Temperature range:
–-40°C to 85°C Industrial
Ultra-Low Power Consumption
–Active Mode:
1 MHz, 1.8V: 350µA
32 kHz, 1.8V: 20µA (including Oscillator)
–Power-down Mode:
0.1µA at 1.8V
8-bit
Microcontroller
with 16K Bytes
In-System
Programmable
Flash
ATmega165V
ATmega165
Preliminary
Summary
Note: This is a summary document. A complete document
is available on our Web site at www.atmel.com.
Features
High Performance, Low Power AVR
®
8-Bit Microcontroller
Advanced RISC Architecture
–130 Powerful Instructions – Most Single Clock Cycle Execution
–32 x 8 General Purpose Working Registers
–Fully Static Operation
–Up to 16 MIPS Throughput at 16 MHz
–On-Chip 2-cycle Multiplier
Non-volatile Program and Data Memories
–16K bytes of In-System Self-Programmable Flash
Endurance: 10,000 Write/Erase Cycles
–Optional Boot Code Section with Independent Lock Bits
In-System Programming by On-chip Boot Program
True Read-While-Write Operation
–512 bytes EEPROM
Endurance: 100,000 Write/Erase Cycles
–1K byte Internal SRAM
–Programming Lock for Software Security
JTAG (IEEE std. 1149.1 compliant) Interface
–Boundary-scan Capabilities According to the JTAG Standard
–Extensive On-chip Debug Support
–Programming of Flash, EEPROM, Fuses, and Lock Bits through the JTAG Interface
Peripheral Features
–Two 8-bit Timer/Counters with Separate Prescaler and Compare Mode
–One 16-bit Timer/Counter with Separate Prescaler, Compare Mode, and Capture
Mode
–Real Time Counter with Separate Oscillator
–Four PWM Channels
–8-channel, 10-bit ADC
–Programmable Serial USART
–Master/Slave SPI Serial Interface
–Universal Serial Interface with Start Condition Detector
–Programmable Watchdog Timer with Separate On-chip Oscillator
–On-chip Analog Comparator
–Interrupt and Wake-up on Pin Change
Special Microcontroller Features
–Power-on Reset and Programmable Brown-out Detection
–Internal Calibrated Oscillator
–External and Internal Interrupt Sources
–Five Sleep Modes: Idle, ADC Noise Reduction, Power-save, Power-down, and
Standby
I/O and Packages
–53 Programmable I/O Lines
–64-lead TQFP and 64-pad MLF
Speed Grade:
–ATmega165V: 0 - 4 MHz @ 1.8 - 5.5V, 0 - 8 MHz @ 2.7 - 5.5V
–ATmega165: 0 - 8 MHz @ 2.7 - 5.5V, 0 - 16 MHz @ 4.5 - 5.5V
Temperature range:
–-40°C to 85°C Industrial
Ultra-Low Power Consumption
–Active Mode:
1 MHz, 1.8V: 350µA
32 kHz, 1.8V: 20µA (including Oscillator)
–Power-down Mode:
0.1µA at 1.8V
8-bit
Microcontroller
with 16K Bytes
In-System
Programmable
Flash
ATmega165V
ATmega165
Preliminary
Summary
Note: This is a summary document. A complete document
is available on our Web site at www.atmel.com.