`
AZ692/AZ693
10 AMP MINIATURE
POWER RELAY
FEATURES
Isolation spacing greater than 8mm
Dielectric strength 4000 Vrms coil to contact
Approvals/Standards include UL, CSA,VDE, IEC, CEE,
SEMKO
Single pole – Forms A, B and C available
10A switching
Life expectancy to 30 million operations
Epoxy sealed version for automatic wave soldering and
cleaning
UL file E44211 ; CSA file LR85091 ; VDE
4120-4940-4002/A1
Logistic Design (UK) Limited
Unit 3 Eagle Centre Way, Sedgwick Road Tel +44 (0)1582 599 600
Luton LU4 9US, United Kingdom Fax +44 (0)1582 599 700


CONTACTS
Arrangement SPDT (1 Form C)
SPST (1 Form A and 1 Form B)

Ratings Resistive load:
Max switching power : 300W or 2500VA
Max switched current : 10A ; 64A for 2ms
Max switched voltage : 150* VDC or 380VAC
UL Rating 10A at 24VDC or 115VAC
0.25HP 120VAC motor load
10A at 250VAC
B300 pilot duty
* If switching voltage is greater than 30VDC, special precautions
must be taken. Please consult the factory.

Material Silver cadmium oxide

Resistance <30 milliohms initially
(at rated current, voltage drop method)


Power

At Pickup Voltage Standard coil 337mW
(typical) Sensitive coil 234mW

Max Continuous 1.9W at 20°C ambient
Dissipation 1.4W at 40°C ambient

Temperature Rise Standard 40°C at nominal coil voltage
Sensitive 26°C at nominal coil voltage

Max Temperature 110°C
Life Expectancy Minimum operations
Mechanical 30 million operations
Electrical 1x10
5
at 10A, 30VDC or 115VAC
2x10
5
at 8A, 250VAC

Operate Time (typical) 6ms at nominal coil voltage

Release Time (typical) 2ms at nominal coil voltage
(with no coil suppression)

Dielectric Strength 4000 Vrms coil to contact
(at sea level for 1 min) 1000 Vrms between open contacts

Insulation Resistance 10,000 megohms min at 500VDC, 20°C,
50% RH

Dropout Greater than 10% of nominal coil voltage

Ambient Temperature At nominal coil voltage
Operating Standard -55°C to 70C
Sensitive -55°C to 80C
Storage Both -55°C to 110C

Vibration 0.062” DA at 10 – 55 Hz

Shock 20g

Enclosure PBT Polyester

Terminals Tinned copper alloy, PC

Weight 17 grammes
GENERAL DATA
NOTES
1. All values at 20°C
2. Relay may pull in with less than ‘Must Operate’ value
3. PCB layout viewed towards terminals
4. Specifications subject to change without notice
5. Unsealed relays should not be dip cleaned
COIL
www.zettlerrelay.com
sales@zettlerrelay.com
LDZR201000