APL1117
器件描述：1A Low Dropout Fast Response Positive Adjustable Regulator and Fixed 1.8V, 2.5V, 2.85V and 3.3V
器件厂商：ANPEC [Anpec Electronics Coropration]
文件大小：156.93KB，共18页
Sponsor by e络盟器件资料摘要：
Copyright ANPEC Electronics Corp.
Rev. B.8 - Jun., 2003
APL1117
www.anpec.com.tw1
ANPEC reserves the right to make changes to improve reliability or manufacturability without notice, and advise
customers to obtain the latest version of relevant information to verify before placing orders.
1A Low Dropout Fast Response Positive Adjustable Regulator and Fixed
1.8V, 2.5V, 2.85V and 3.3V
• Guaranteed Output Voltage Accuracy within 2%
• Fast Transient Response
• Guaranteed Dropout Voltage at Multiple
Currents
• Load Regulation : 0.1% Typ.
• Line Regulation : 0.03% Typ.
• Low Dropout Voltage : 1.1V Typ. at I
OUT
=1A
• Current Limit : 1A Typ. at T
J
=25°C
• On-Chip Thermal Limiting : 150°C Typ.
• Adjustable Output : 1.25~10.7V
• Standard 3-pin TO-220, TO-252, TO-263 and
SOT-223 Power Packages
Features
Applications
• Active SCSI Terminators
• Low Voltage Logic Supplies
• Battery-Powered Circuitry
• Post Regulator for Switching Power Supply
General Description
The APL1117 is a low dropout three-terminal adjust-
able regulators with 1A output current capability. In
order to obtain lower dropout voltage and faster tran-
sient response, which is critical for low voltage ap-
plications , the APL1117 has been optimized. The
device is available in an adjustable version and fixed
output voltages of 1.8V, 2.5V, 2.85V and 3.3V. The
output available voltage range of an adjustable ver-
sion is from 1.25~10.7V with an input supply below
12V. Dropout voltage is guaranteed at a maximum of
1.3V at 1A. Current limit is trimmed to ensure speci-
fied output current and controlled short-circuit current.
On-chip thermal limiting provides protection against
any combination of overload that would create exces-
sive junction temperatures. The APL1117 is available
in the industry standard 3-pin TO-220, TO-252, TO-
263, and the low profile surface mount SOT-223
power packages which can be used in applications
where space is limited.
Pin Description
Front View for TO-252
TAB IS V
OUT
1
2
3
V
IN
V
OUT
ADJ/GND
Front View for TO-263
1
2
3 V
IN
V
OUT
ADJ/GND
TAB is V
OUT
Front View for TO-220
1
2
3
V
IN
V
OUT
ADJ/GND
Rev. B.8 - Jun., 2003
APL1117
www.anpec.com.tw1
ANPEC reserves the right to make changes to improve reliability or manufacturability without notice, and advise
customers to obtain the latest version of relevant information to verify before placing orders.
1A Low Dropout Fast Response Positive Adjustable Regulator and Fixed
1.8V, 2.5V, 2.85V and 3.3V
• Guaranteed Output Voltage Accuracy within 2%
• Fast Transient Response
• Guaranteed Dropout Voltage at Multiple
Currents
• Load Regulation : 0.1% Typ.
• Line Regulation : 0.03% Typ.
• Low Dropout Voltage : 1.1V Typ. at I
OUT
=1A
• Current Limit : 1A Typ. at T
J
=25°C
• On-Chip Thermal Limiting : 150°C Typ.
• Adjustable Output : 1.25~10.7V
• Standard 3-pin TO-220, TO-252, TO-263 and
SOT-223 Power Packages
Features
Applications
• Active SCSI Terminators
• Low Voltage Logic Supplies
• Battery-Powered Circuitry
• Post Regulator for Switching Power Supply
General Description
The APL1117 is a low dropout three-terminal adjust-
able regulators with 1A output current capability. In
order to obtain lower dropout voltage and faster tran-
sient response, which is critical for low voltage ap-
plications , the APL1117 has been optimized. The
device is available in an adjustable version and fixed
output voltages of 1.8V, 2.5V, 2.85V and 3.3V. The
output available voltage range of an adjustable ver-
sion is from 1.25~10.7V with an input supply below
12V. Dropout voltage is guaranteed at a maximum of
1.3V at 1A. Current limit is trimmed to ensure speci-
fied output current and controlled short-circuit current.
On-chip thermal limiting provides protection against
any combination of overload that would create exces-
sive junction temperatures. The APL1117 is available
in the industry standard 3-pin TO-220, TO-252, TO-
263, and the low profile surface mount SOT-223
power packages which can be used in applications
where space is limited.
Pin Description
Front View for TO-252
TAB IS V
OUT
1
2
3
V
IN
V
OUT
ADJ/GND
Front View for TO-263
1
2
3 V
IN
V
OUT
ADJ/GND
TAB is V
OUT
Front View for TO-220
1
2
3
V
IN
V
OUT
ADJ/GND