G77G77G77G2EG70G72G6FG74G65G6BG64G65G76G69G63G65G73G2EG63G6FG6DG31G30G35G30G34G38G2EG52G32G20G20G37G2FG30G32
G30G35G30G34G38
G2EG20G2EG20G2EG20G65G6EG67G69G6EG65G65G72G65G64G20G73G6FG6CG75G74G69G6FG6EG73G20G66G6FG72G20G74G68G65G20G74G72G61G6EG73G69G65G6EG74G20G65G6EG76G69G72G6FG6EG6DG65G6EG74G99
G34G32G30G4CG45G32G38
G74G68G72G75
G34G32G30G4CG42G36G30
G54G57G4FG20G4CG49G4EG45G20G50G41G49G52G20G34G2DG32G30G6DG41G20G43G4FG4EG54G52G4FG4CG20G4CG4FG4FG50G20G50G52G4FG54G45G43G54G4FG52
G41G50G50G4CG49G43G41G54G49G4FG4EG53
✔ Multi Process Control Loops
✔ Fire & Security Systems
✔ Petro-Chemical Plants
✔ Refineries & Tank Farms
G49G45G43G20G20G43G4FG4DG50G41G54G49G42G49G4CG49G54G59G20G28G45G4EG36G31G30G30G30G2DG34G29
✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV
✔ 61000-4-4 (EFT): 40A - 5/50ns
✔ 61000-4-5 (Surge): 8/20µs - 95A, Level 4(Line-Gnd) & 48A, Level 4(Line-Line)
G46G45G41G54G55G52G45G53
✔ Designed for 4-20mA Current Loops
✔ Automatic Reset - Will Not Interrupt Service
✔ Permanent Two-Stage Line Pair Protection
✔ Line-to-Ground (Common) & Line-to-Line (Differential) Protection
✔ Subnanosecond Response Time
✔ Effective Against Lightning, Inductive Switching & ESD
G4DG45G43G48G41G4EG49G43G41G4CG20G20G43G48G41G52G41G43G54G45G52G49G53G54G49G43G53
✔ Module Weight 160 grams (Approximate)
✔ Board Weight 32 grams (Approximate)
✔ Flammability Rating UL 94V-0
✔ Device Marking: Part Number, Logo, Date Code, and Terminal Designations for the LE Device
G44G45G53G43G52G49G50G54G49G4FG4E
The 420LE/B series is a two stage transient voltage protector providing primary and secondary protection against lightning, inductive
switching and electrostatic discharge (ESD) transient threats. The first stage diverts the transient current through the ground terminal
return path and the second stage clamps the voltage to a safe level without interruption of service.
The 420LE/B series is designed to protect data lines from differential (line to line) and common mode (line to ground) transients.
Terminals 1 and 2, 3 and 4 for the 420LE and pins 2 and 3, 4, and 5 for the 420LB are designated as line pairs. Each line pair is
referenced to ground. A transient voltage suppressor is connected across each line pair for differential mode protection. Each line
pair is referenced to ground.
This product can also be used on telephone, signal/data lines, security, timing and control interface circuits. For most applications,
the product should be located as close as possible to the equipment being protected. A low impedance grounding system is impor-
tant to maintain a low voltage clamp between the line-to-ground connection.
G34G32G30G4CG45G20G50G41G43G4BG41G47G45
G34G32G30G4CG42G20G42G4FG41G52G44