AWS5508
器件描述:SP4T PHEMT Transmit/Receive Antenna Switch GSM 900 MHz/DCS 1800 MHz/PCS 1900 MHz
文件大小:111.69KB,共8页
Sponsor by e络盟
器件资料摘要:
08/2001
Table 1: Pin Description
FEATURES
• 2.7V Control Operation
• Tri-band Operation
• High Isolation
• High Power
• High Linearity
• Small Leadless Package
APPLICATIONS
• SP4T Antenna switch operating in the GSM
900 MHz, DCS 1800 MHz, and PCS 1900 MHz
bands
AWS5508
SP4T PHEMT
Transmit/Receive Antenna Switch
GSM 900 MHz/DCS 1800 MHz/PCS 1900 MHz
ADVANCED PRODUCT INFORMATION - Rev 0.3
PRODUCT DESCRIPTION
The AWS5508 SP4T high power antenna switch is
designed to operate in the GSM 900Mhz, DCS
1800MHz, and PCS 1900MHz frequency bands. All 4
ports of the switch have identical electrical and
linearity performance which allows flexibility in
system design. Switching between ports is
accomplished using 2.7 to 6 volts differential control
voltages on the 4 control pins. The switch is provided
in a leadless MLP-16 quad flat package.
S19
MLP-16 Multipin Leadless
Plastic Package
PIN NAME DESCRIPTION PIN NAME DESCRIPTION
1 V1 Control for RF1 , pin 2. 9 RF3 RF port, controlled by V3.
2 RF1 RF port, controlled by V1. 10 GND Ground connection, keep short as possible.
3 GND Ground connection, keep short as possible. 11 GND Ground connection, keep short as possible.
4 RF2 RF port, controlled by V2. 12 RF4 RF port, controlled by V4.
5 GND Ground connection, keep short as possible. 13 GND Ground connection, keep short as possible.
6 V2 Control for RF2, pin 4. 14 V4 Control for RF4, pin 12.
7 V3 Control for RF3, pin 9. 15 GND Ground connection, keep short as possible.
8 GND Ground connection, keep short as possible. 16 RFc Common RF Port.
Figure 1: Pin Out Diagram
1
2
3
4
5 6 7 8
9
10
11
12
13141516
GND
GND GND
GND
GND
GND GND
V1
V4
V2 V3
Vs
Optional Rs
Note 3
Cb
Cb
Cb
Cb
Cb
RFc
RF1
RF2 RF
3
RF4
TOP VIEW
AWS5508
PIN 1 INDICATOR
1. DC blocking capacitors Cb and optional
resistor Rs must be supplied externally.
2. Cb = 100 pF for operation >500MHz.
3. The use of resistor Rs to the positive
voltage supply is optional. It is only required
if it is necessary to have all RF ports in Isolation
state at the same time. Also, using Rs will improve
linearity performance to a small degree when VCTL
is at its lower limit. Rs = 10k when used.Ω