EEWorld首页 新闻 论坛 博客 白皮书 专题 电子电路 电子器件 单片机 嵌入式 模拟电路 DSP FPGA 电源管理 手机/便携 医疗电子 汽车电子 工业控制
厂商索引:A-B-C-D-E-F-G-H-I-J-K-L-M-N-O-P-Q-R-S-T-U-V-W-X-Y-Z

BP365

器件描述:65 Watt Photovoltaic Module
器件厂商:ETC [ETC]
厂商主页:
文件大小:265.45KB,共2页
Sponsor by e络盟
器件资料摘要:
High-efficiency photovoltaic module using silicon nitride coated multicrystalline silicon cells.

Performance
Rated power (P
max
) 65W
Nominal voltage 12V
Limited Warranty
1
25 years


Configuration
BP 365U Clear universal frame and standard J-box


Electrical Characteristics
2
BP 365
Maximum power (P
max
)
3
65W
Voltage at Pmax (V
mp
) 17.6V
Current at Pmax (I
mp
) 3.69A
Warranted minimum P
max
60W
Short-circuit current (I
sc
) 3.99A
Open-circuit voltage (V
oc
) 22.1V
Temperature coefficient of I
sc
(0.065±0.015)%/ °C
Temperature coefficient of V
oc
-(80±10)mV/°C
Temperature coefficient of power -(0.5±0.05)%/ °C
NOCT (Air 20°C; Sun 0.8kW/m
2
; wind 1m/s) 47±2°C
Maximum series fuse rating 20A
Maximum system voltage 600V (U.S. NEC & IEC 61215 rating)
1000V (TÜV Rheinland rating)


Mechanical Characteristics
Dimensions Length: 1111mm (43.7”) Width: 502mm (19.8”) Depth: 50mm (1.97”)

Weight 7.2 kg (15.9 pounds)

Solar Cells 36 cells (114mm x 114mm) in a 4x9 matrix connected in series

Junction Box U-Version junction box with 6-terminal connection block; IP 54, accepts PG 13.5,
M20, ½ inch conduit, or cable fittings accepting 6-12mm diameter cable.
Terminals accept 2.5 to 10mm
2
(8 to 14 AWG) wire.
Diodes Schottky by-pass diodes included, every 18 cells

Construction Front: High-transmission 3mm (1/8
th
inch) tempered glass; Back: Tedlar;
Encapsulant: EVA

Frame Clear anodized aluminum alloy type 6063T6 Universal frame; Color: silver







BP 365
65 Watt Photovoltaic Module

1. Module Warranty: 25-year limited warranty of 80% power output; 12-year limited warranty of 90% power output; 5-year limited warranty of
materials and workmanship. See your local representative for full terms of these warranties.
2. These data represent the performance of typical BP 365 products, and are based on measurements made in accordance with ASTM E1036
corrected to SRC (STC.)
3. During the stabilization process that occurs during the first few months of deployment, module power may decrease by up to 3% from
typical P
max
.
4024-v7 04/04 BP Solar 2004