CONTACTS
Arrangement SPDT (1 Form C)
Crossbar contacts
Ratings Resistive load:
Max. switched power: 30 W or 62.5 VA
Max. switched current: 1 A continous
2 A (30 s, 50% duty)
Max. switched voltage: 60 VDC* or 125 VAC
* Note: If switching voltage is greater than 30 VDC,
special precautions must be taken.
Please contact the factory.
Rated Load
UL, CUR 1.0 A at 30 VDC resistive
0.3 A at 60 VDC resistive
0.5 A at 125 VAC resistive
Material Silver palladium, gold clad
Resistance < 100 milliohms initially
ZETTLER electronics GmbH
Fax +49 89 800 97 200 www.ZETTLERelectronics.com
office@ZETTLERelectronics.com 0 97 800 89 +49 Tel. Germany Puchheim, D-82178 Junkersstrasse 3,
2004-08-22
AZ957
COIL
Power
At Pickup Voltage Standard coil: 128 mW
(typical) Sensitive coil: 96 mW
Max. Continuous 0.5 W at 20°C (68°F) ambient
Dissipation
Temperature Rise
Standard coil 33°C (59°F) at nominal coil voltage
Sensitive coil 25°C (45°F) at nominal coil voltage
Temperature Max. 105°C (221°F)
GENERAL DATA
Life Expectancy Minimum operations
Mechanical 10 million operations
Electrical 1 x 10
5
at 0.5 A 120 VAC Res.
Operate Time (typical) Standard: 3 ms at nominal coil voltage
Sensitive: 5 ms at nominal coil voltage
Release Time (typical) 1 ms at nominal coil voltage
(with no coil suppression)
Capacitance Coil to contact: 7.0 pF
Contact to contact: 7.0 pF
Bounce (typical) At 10 mA contact current
2 ms at operate
8 ms at release
Dielectric Strength 1250 Vrms coil to contact
(at sea level for 1 min.) 400 Vrms between open contacts
Meets FCC Part 68.302 1500 V lightning surge
Meets FCC Part 68.304 1000 V dielectric
Insulation 100 megohms min. at 20°C, 500 VDC,
Resistance 50% RH
Dropout Greater than 10% of nominal coil voltage
Ambient Temperature At nominal coil voltage
Operating Standard: -40°C (-40°F) to 70°C (158°F)
Sensitive: -40°C (-40°F) to 80°C (176°F)
Storage Both: -40°C (-40°F) to 105°C (221°F)
Vibration 0.13" (3.3 mm) DA at 10–55 Hz
Shock 10 g
Enclosure P.E.T. polyester
Terminals Tinned copper alloy
Max. Solder Temp. 270°C (518°F)
Max. Solder Time 5 seconds
Max. Immersion Time 30 seconds
Weight 2.2 grams
Packing unit in pcs 20 per plastic tube / 1000 per carton box
SUBMINIATURE
PC BOARD RELAY
FEATURES
• Subminiature size for high density packaging
• DIL pitch terminals
• Epoxy sealed for automatic wave soldering
• High sensitivity: 150 mW nominal with 96 mW pickup
• Meets FCC Part 68.302 1500 V lightning surge
• Meets FCC Part 68.304 1000 V dielectric
• UL, CUR file E43203
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.