GENERAL DATA
Life Expectancy Minimum operations
Mechanical 1 X 10
7
Electrical 1 X 10
5
at 8 A 250 VAC Res.
Operate Time (typical) 10 ms at nominal coil voltage
Release Time (typical) 5 ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength 4000 Vrms coil to contact
(at sea level for 1 min.) 1000 Vrms between open contacts
Insulation 1000 megohms min. at 20°C, 500 VDC,
Resistance 50% RH
Insulation C250
(according to Overvoltage category: III
DIN VDE 0110, Pollution degree: 3
IEC 60664-1) Nominal voltage: 250 VAC
Dropout Greater than 10% of nominal coil voltage
Ambient Temperature At nominal coil voltage
Operating -40°C (-40°F) to 85°C (185°F)
Storage -40°C (-40°F) to 105°C (221°F)
Vibration 0.062" (1.5 mm) DA at 10–55 Hz
Shock 20 g
Enclosure P.B.T. polyester, UL94 V-0
Terminals Tinned copper alloy, P.C.
Max. Solder Temp. 270°C (518°F)
Max. Solder Time 5 seconds
Max. Solvent Temp. 80°C (176°F)
Max. Immersion Time 30 seconds
Weight 14 grams
Packing unit in pcs 50 per plastic tray / 1500 per carton box
CONTACTS
Arrangement SPDT (1 Form C)
SPST (1 Form A and 1 Form B)
Ratings Resistive load:
Max. switched power: 240 W or 2500 VA
Max. switched current: 10 A
Max. switched voltage: 240 VDC* or 440 VAC
* Note: If switching voltage is greater than 30 VDC,
special precautions must be taken.
Please contact the factory.
Rated Load
UL, CUR 10 A at 30 VDC resistive
10 A at 250 VAC general use
1
/4 HP 120 VAC
1
/2 HP 250 VAC
B 300 pilot duty
VDE 8 A at 250 VAC resistive, 100k cycles [1]
10 A at 250 VAC resistive, 50k cycles [2]
Material Silver cadmium oxide [1] or silver tin oxide [2]
Resistance < 30 milliohms initially
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
4. It’s recommended to remove vent nipple on sealed versions to
expand life expectancy when switching higher loads.
COIL
Power
At Pickup Voltage 110 mW
(typical) 140 mW (48 VDC coil)
Max. Continuous 1.5 W at 20°C (68°F) ambient
Dissipation
Temperature Rise 20°C (36°F) at nominal coil voltage
Temperature Max. 110°C (230°F)
AZ696
ZETTLER electronics GmbH
Fax +49 89 800 97 200 www.ZETTLERelectronics.com
office@ZETTLERelectronics.com 0 97 800 89 +49 Tel. Germany Puchheim, D-82178 Junkersstrasse 3,
2004-11-25
10 AMP SUBMINIATURE
POWER RELAY
FEATURES
• High sensitivity, 110 mW pickup
• Dielectric strength 4000 Vrms
• Isolation spacing greater than 8 mm
• Proof tracking index (PTI/CTI) 250
• 10 Amp switching capability
• Epoxy sealed version available
• Reinforced insulation, EN 60730-1 (VDE 0631, part 1)
EN 60335-1 (VDE 0700, part 1)
• UL, CUR file E44211,
• VDE file 117422 ÜG