ATS665LSG




True Zero Speed,
High Accuracy, Gear Tooth Sensor
















Pin 1: V
CC

Pin 2: V
OUT

Pin 3: Tie to Gnd or Float
Pin 4: Gnd


The ATS665 true zero-speed gear tooth sensor is an optimized
Hall IC/magnet configuration packaged in a molded module that
provides a user-friendly solution for digital gear tooth sensing
applications. The sensor module consists of an over-molded
package, which holds together a samarium cobalt magnet, a pole
piece and a true zero-speed Hall IC that has been optimized to the
magnetic circuit. This small package can be easily assembled and
used in conjunction with gears of various shapes and sizes.

The sensor incorporates a dual element Hall IC that switches in
response to differential magnetic signals created by a ferrous
target. The IC contains a sophisticated compensating circuit
designed to reduce the detrimental effects of magnet and system
offsets. Digital processing of the analog signal provides zero speed
performance independent of air gap and also dynamic adaptation of
device performance to the typical operating conditions found in
automotive applications (reduced vibration sensitivity). High-
resolution peak detecting DACs are used to set the adaptive
switching thresholds of the device. Hysteresis in the thresholds
reduces the negative effects of any anomalies in the magnetic
signal associated with the targets used in many automotive
applications.

This sensor’s ability to provide tight duty cycle at high speeds
and over a wide temperature range makes it ideal for transmission
and industrial speed applications. The ATS665 is available in the
SG package in the automotive temperature range, -40° to 150° (L).

ABSOLUTE MAXIMUM RATINGS
Supply Voltage
1
,
V
CC
. . . . . . . . . . . . . . . . . . . . . . . . . . 26.5 V
Reverse Supply Voltage,
V
RCC
. . . . . . . . . . . . . . . . . . . . . . . . . . –18 V
Reverse Output Current
2
,
I
RCC
. . . . . . . . . . . . . . . . . . . . . . . . . . . 50 mA
Continuous Output Current,
I
OUT
. . . . . . . . . . . . . . . . . . . . . . . . . . 20 mA
Ambient Operating Temperature Range,
T
A
. . . . . . . . . . . . . . . . . . -40° C to 150°C
Storage Temperature,
T
S
. . . . . . . . . . . . . . . . . . . . -65° C to 170°C
Maximum Junction Temperature,
T
Jmax
. . . . . . . . . . . . . . . . . . . . . . . . . 165° C
Maximum Junction Temperature – 100 Hours,
T
Jmax
. . . . . . . . . . . . . . . . . . . . . . . . . 185° C


FEATURES & BENEFITS
null True zero-speed operation
null Switchpoints independent of air gap
null High vibration immunity
null Precise duty cycle signal over operating temperature range
null Large operating air gaps
null Defined power-on state
null Wide operating voltage range
null Digital output representing target profile
null Single-chip sensing IC for high reliability
null Small mechanical size
null Optimized Hall IC magnetic system
null 200 µs power-on time at gear speed < 100 rpm
null AGC and reference adjust circuit
null Under-voltage lockout




1
Refer to power de-rating curve
Use complete part number when ordering: ATS665LSG.
2
V
OUT
≥ -0.5V