EEWorld首页 新闻 论坛 博客 白皮书 专题 电子电路 电子器件 单片机 嵌入式 模拟电路 DSP FPGA 电源管理 手机/便携 医疗电子 汽车电子 工业控制
厂商索引:A-B-C-D-E-F-G-H-I-J-K-L-M-N-O-P-Q-R-S-T-U-V-W-X-Y-Z

ACS750LCA-075

器件描述:CURRENT SENSOR ACS750 X CA -075
器件厂商:ALLEGRO [Allegro MicroSystems]
文件大小:327.76KB,共11页
Sponsor by e络盟
器件资料摘要:
Current Sensor: ACS750xCA-075



31Oct03, CMG, Rev 2.0

1

115 Northeast Cutoff, Box 15036
Worcester, Massachusetts 01615-0036 (508) 853-5000
Copyright © 2003, Allegro MicroSystems, Inc.



Pin 1: Vcc
Pin 2: Gnd
Pin 3: Output
Pin 4: Ip+
Pin 5: Ip-


ABSOLUTE MAXIMUM RATINGS

Operating Temperature
‘S’……….……………….. -20 to +85°C
‘L’………………………. -40 to +150°C
Supply Voltage, Vcc 16V
Output Voltage 16V
Output Current Source 3mA
Output Current Sink 10mA
Maximum Storage Temperature 170°C
Maximum Junction Temperature 165°C
Thermal Resistance, R
ΘJA
TBD °C/W










The Allegro ACS750 family of current sensors provides
economical and precise solutions for current sensing in industrial,
commercial, automotive, and communications systems. The device
package allows for easy implementation by the customer. Typical
applications include motor control, load detection and management,
switched mode power supplies and over-current fault protection.

The sensor consists of a precision linear Hall IC optimized to an
internal magnetic circuit to increase device sensitivity. The
combination of a precisely controlled self-aligning assembly process
(patents pending) and the factory programmed precision of the
linear Hall sensor result in high level performance and product
uniformity.

The primary conductor used for current sensing (terminals 4 and 5)
is designed for extremely low power loss. The power terminals are
also electrically isolated from the sensor leads (pins 1 – 3). This
allows the ACS750 family of sensors to be used in applications
requiring electrical isolation without the use of opto-isolators or other
costly isolation techniques.

The output of the device has a positive slope (>Vcc/2) when an
increasing current flows from terminal 4 to terminal 5.

Features and Benefits
• Monolithic Hall IC for High Reliability
• Single +5V Supply
• High Isolation Voltage
• Lead-free
• Automotive Temperature Range
• End-of-line Factory Trimmed for Gain and Offset
• Ultra-low Power Loss: Low Resistance of Primary Conductor
• Ratiometric Output from Supply Voltage
• Low Thermal Drift of Offset Voltage
• On-chip Transient Protection
• Small Package Size with Easy Mounting Capability

Applications
• Automotive Systems
• Industrial Systems
• Motor Control
• Servo Systems
• Power Conversion
• Battery Monitors


5
4
1 2 3
Always order by complete part number:

ACS750SCA-075 or
ACS750LCA-075