www.vishay.com
74
592D
Vishay Sprague
Document Number 40004
Revision 20-Oct-04
For technical questions, contact tantalum@vishay.com
Solid Tantalum Chip Capacitors
TANTAMOUNT
®
, Low Profile, Conformal Coated, Maximum CV
PERFORMANCE CHARACTERISTICS
Operating Temperature: - 55°C to + 85°C. (To + 125°C
with voltage derating.)
FEATURES
• New extended range offerings.
• 1.0mm to 2.5mm height.
• Terminations: Lead (Pb)-free (2) standard.
• Low Impedance
• 8mm, 12mm and 24mm tape and reel packaging
available per EIA-481-1 and reeling per IEC 286-3. 7”
[178mm] standard.
13” [330mm] available.
• Case code compatibility with EIA 535BAAC and
CECC 30801 molded chips.
Note: The anode termination (D less B) will be a minimum of 0.012" [0.3mm].
Capacitance Range: 1.0µF to 3300µF
Capacitance Tolerance: ±10%, ±20% standard.
Voltage Rating: 4 WVDC to 35 WVDC
ORDERING INFORMATION
T
REEL SIZE AND
PACKAGING
592D
TYPE
2
TERMINATION
B
CASE CODE
010
DC VOLTAGE RATING
@ + 85°C
X0
CAPACITANCE
TOLERANCE
106
CAPACITANCE
This is expressed in
picofarads. The first two
digits are the significant
figures. The third is the
number of zeros to follow.
X0 = ± 20%
X9 = ± 10%
This is expressed in volts. To
complete the three-digit block,
zeros precede the voltage rating.
A decimal point is indicated by
an "R" (6R3 = 6.3 volts).
See Ratings
and Case
Codes Table.
2 = 100% Tin
4 = Gold Plated
T=Tape and Reel
7" [178mm] Reel
W = 13” [330mm] Reel
Note: Preferred Tolerance and reel sizes are in bold.
We reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same case size.
Voltage substitutions will be marked with the higher voltage rating.
DIMENSIONS in inches [millimeters]
W
D
L
A
B J J
Tantalum Wire Nib
Identifies Anode
(+) Terminal
H
CASE CODE L (Max.) W H A B D (Ref.) J (Max.)
A
0.146 0.072 ± 0.012 0.048 ± 0.012 0.031 ± 0.012 0.087 ± 0.016 0.115 0.004
[3.7] [1.8 ± 0.3] [1.2 ± 0.3] [0.80 ± 0.30] [2.2 ± 0.4] [2.9] [0.1]
B
0.158 0.110 + 0.012-0.016 0.047 ± 0.012 0.031 ± 0.012 0.097 ± 0.016 0.139 0.004
[4.0] [2.8 + 0.3-0.4] [1.2 ± 0.3] [0.80 ± 0.30] [2.5 ± 0.4] [3.5] [0.1]
C
0.281 0.126 ± 0.012 0.047 ± 0.012 0.051 ± 0.012 0.180 ± 0.024 0.238 0.004
[7.1] [3.2 ± 0.3] [1.2 ± 0.3] [1.3 ± 0.30] [4.4 ± 0.6] [6.0] [0.1]
D
0.298 0.170 ± 0.012 0.047 ± 0.012 0.051 ± 0.012 0.180 ± 0.024 0.254 0.004
[7.5] [4.3 ± 0.3] [1.2 ± 0.3] [1.3 ± 0.30] [4.6 ± 0.6] [6.4] [0.1]
R
0.285 0.235 ± 0.012 0.047 ± 0.012 0.051 ± 0.012 0.180 ± 0.024 0.246 0.004
[7.2] [6.0 ± 0.3] [1.2 ± 0.3] [1.3 ± 0.30] [4.6 ± 0.6] [6.2] [0.1]
S
0.126 ± 0.012 0.063 ± 0.012 0.040 ± 0.012 0.031 ± 0.012 0.079 ± 0.012 0.087 0.004
[3.2 ± 0.3] [1.6 ± 0.3] [1.0 ± 0.3] [0.8 ± 0.3] [2.0 ± 0.3] [2.2] [0.1]
T
0.158 0.116 ± 0.012 0.079 0.031 ± 0.012 0.097 ± 0.016 0.139 0.004
[4.0] [2.8 ± 0.3] [2.0] Max. [0.8 ± 0.3] [2.5 ± 0.4] [3.5] [0.1]
U
0.281 0.126 ± 0.012 0.079 0.051 ± 0.012 0.180 ± 0.024 0.238 0.004
[7.1] [3.2 ± 0.3] [2.0] Max. [1.3 ± 0.3] [4.6 ± 0.6] [6.0] [0.1]
V
0.298 0.170 ± 0.012 0.079 0.051 ± 0.012 0.180 ± 0.024 0.254 0.004
[7.5] [4.3 ± 0.3] [2.0] Max. [1.3 ± 0.3] [4.6 ± 0.6] [6.4] [0.1]
W
0.285 0.235 ± 0.012 0.079 0.051 ± 0.012 0.180 ± 0.024 0.246 0.004
[7.2] [6.0 ± 0.3] [2.0] Max. [1.3 ± 0.3] [4.6 ± 0.6] [6.2] [0.1]
X
0.575 0.290 ± 0.010 0.079 0.050 ± 0.016 0.470 ± 0.024 0.524 0.004
[14.5] [7.37 ± 0.25] [2.0] Max. [1.3 ± 0.4] [11.9 ± 0.6] [13.2] [0.1]
Y
0.575 0.290 ± 0.010 0.098 0.051 ± 0.016 0.470 ± 0.024 0.524 0.004
[14.5] [7.37 ± 0.25] [2.5] Max. [1.3 ± 0.4] [11.9 ± 0.6] [13.2] [0.1]