1SMA5913BT3
器件描述：1.5 Watt Plastic Surface Mount Zener Voltage Regulators
器件厂商：ONSEMI [ON Semiconductor]
文件大小：82KB，共6页
Sponsor by e络盟器件资料摘要：
Semiconductor Components Industries, LLC, 2004
April, 2004 − Rev. 4
1 Publication Order Number:
1SMA5913BT3/D
1SMA5913BT3 Series
1.5 Watt Plastic
Surface Mount
Zener Voltage Regulators
This complete new line of 1.5 Watt Zener Diodes offers the
following advantages.
Specification Features
• Standard Zener Breakdown Voltage Range − 3.3 V to 68 V
• ESD Rating of Class 3 (>16 kV) per Human Body Model
• Flat Handling Surface for Accurate Placement
• Package Design for Top Slide or Bottom Circuit Board Mounting
• Low Profile Package
• Ideal Replacement for MELF Packages
• Pb−Free Packages are Available
Mechanical Characteristics:
CASE: Void-free, transfer-molded plastic
FINISH: All external surfaces are corrosion resistant with readily
solderable leads
MAXIMUM CASE TEMPERATURE FOR SOLDERING PURPOSES:
260°C for 10 seconds
POLARITY: Cathode indicated by molded polarity notch or cathode
band
FLAMMABILITY RATING: UL 94 V−0 @ 0.125 in
MAXIMUM RATINGS
Rating Symbol Value Unit
DC Power Dissipation @ T
L
= 75°C,
Measured Zero Lead Length (Note 1.)
Derate above 75°C
Thermal Resistance −
Junction−to−Lead
P
D
R
JL
1.5
20
50
Watts
mW/°C
°C/W
DC Power Dissipation @ T
A
= 25°C
(Note 2.) Derate above 25°C
Thermal Resistance −
Junction−to−Ambient
P
D
R
JA
0.5
4.0
250
Watts
mW/°C
°C/W
Operating and Storage
Temperature Range
T
J
, T
stg
−65 to
+150
°C
Maximum ratings are those values beyond which device damage can occur.
Maximum ratings applied to the device are individual stress limit values (not
normal operating conditions) and are not valid simultaneously. If these limits
are exceeded, device functional operation is not implied, damage may occur
and reliability may be affected.
1. 1″ square copper pad, FR−4 board
2. FR−4 Board, using ON Semiconductor minimum recommended footprint
SMA
CASE 403D
PLASTIC
8xxB = Specific Device Code
= (See Table Next Page)
LL = Assembly Location
Y = Year
WW = Work Week
8xxB
LLYWW
MARKING DIAGRAM
CATHODE ANODE
Device
*
Package Shipping
†
ORDERING INFORMATION
1SMA59xxBT3 SMA 5000/Tape & Reel
*The “T3” suffix refers to a 13 inch reel.
http://onsemi.com
1SMA59xxBT3G SMA
(Pb−Free)
5000/Tape & Reel
Individual devices are listed on page 2 of this data sheet.
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
April, 2004 − Rev. 4
1 Publication Order Number:
1SMA5913BT3/D
1SMA5913BT3 Series
1.5 Watt Plastic
Surface Mount
Zener Voltage Regulators
This complete new line of 1.5 Watt Zener Diodes offers the
following advantages.
Specification Features
• Standard Zener Breakdown Voltage Range − 3.3 V to 68 V
• ESD Rating of Class 3 (>16 kV) per Human Body Model
• Flat Handling Surface for Accurate Placement
• Package Design for Top Slide or Bottom Circuit Board Mounting
• Low Profile Package
• Ideal Replacement for MELF Packages
• Pb−Free Packages are Available
Mechanical Characteristics:
CASE: Void-free, transfer-molded plastic
FINISH: All external surfaces are corrosion resistant with readily
solderable leads
MAXIMUM CASE TEMPERATURE FOR SOLDERING PURPOSES:
260°C for 10 seconds
POLARITY: Cathode indicated by molded polarity notch or cathode
band
FLAMMABILITY RATING: UL 94 V−0 @ 0.125 in
MAXIMUM RATINGS
Rating Symbol Value Unit
DC Power Dissipation @ T
L
= 75°C,
Measured Zero Lead Length (Note 1.)
Derate above 75°C
Thermal Resistance −
Junction−to−Lead
P
D
R
JL
1.5
20
50
Watts
mW/°C
°C/W
DC Power Dissipation @ T
A
= 25°C
(Note 2.) Derate above 25°C
Thermal Resistance −
Junction−to−Ambient
P
D
R
JA
0.5
4.0
250
Watts
mW/°C
°C/W
Operating and Storage
Temperature Range
T
J
, T
stg
−65 to
+150
°C
Maximum ratings are those values beyond which device damage can occur.
Maximum ratings applied to the device are individual stress limit values (not
normal operating conditions) and are not valid simultaneously. If these limits
are exceeded, device functional operation is not implied, damage may occur
and reliability may be affected.
1. 1″ square copper pad, FR−4 board
2. FR−4 Board, using ON Semiconductor minimum recommended footprint
SMA
CASE 403D
PLASTIC
8xxB = Specific Device Code
= (See Table Next Page)
LL = Assembly Location
Y = Year
WW = Work Week
8xxB
LLYWW
MARKING DIAGRAM
CATHODE ANODE
Device
*
Package Shipping
†
ORDERING INFORMATION
1SMA59xxBT3 SMA 5000/Tape & Reel
*The “T3” suffix refers to a 13 inch reel.
http://onsemi.com
1SMA59xxBT3G SMA
(Pb−Free)
5000/Tape & Reel
Individual devices are listed on page 2 of this data sheet.
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.