AD6C111-L
器件资料摘要：
AD6C111-L
1 Form A
Solid State Relay
The AD6C111-L is a bi-directional, single-pole, single-throw, normally open multipurpose solid-state relay. It is designed to replace
electromechanical relays in general purpose switching applications. The relay consists of an integrated circuit that drives two rugged
source-to-source enhancement type DMOS transistors - optically coupled to a light emitting diode. This device also includes current-
limiting circuitry. During increased load currents or transient current spikes, this circuitry acts to bring the current down, protecting
downstream components.
DESCRIPTION
FEATURES APPLICATIONS
OPTIONS/SUFFIXES*
SCHEMATIC DIAGRAM
ABSOLUTE MAXIMUM RATINGS*
APPROVALS
High input-to-output isolation
•
Low input control power consumption
•
110mA maximum continuous load current
•
40 ohms maximum on-resistance
•
Long life/high reliability
•
Current limiting
•
Reed relay replacement
•
Meter reading systems
•
Medical equipment
•
Battery monitoring
•
Multiplexers
•
Surface Mount Option
•
-S
Tape and Reel Option
•
-TR
NOTE: Suffixes listed above are not included in marking on
device for part number identification.
PARAMETER UNIT MIN TYP MAX
Storage Temperature °C -55 125
Operating Temperature °C -40 85
Continuous Input Current mA 40
Transient Input Current mA 400
Reverse Input Control
Voltage
V 6
Output Power Dissipation mW 800
*The values indicated are absolute stress ratings. Functional operation of the
device is not implied at these or any conditions in excess of those defined in
electrical characteristics section of this document. Exposure to Absolute
Ratings may cause permanent damage to the device and may adversely
affect reliability.
BABT CERTIFICATE #607836:
BS EN 60950, BS EN 41003, BS EN 60065
•
CSA CERTIFICATE #LR111581-1
•
UL FILE #E90096
•
rev 1.4 (10/25/04)
© 2004 Solid State Optronics • San José, CA
www.ssousa.com • +1.408.293.4600
Page 1 of 6 AD6C111-L
1 Form A
Solid State Relay
The AD6C111-L is a bi-directional, single-pole, single-throw, normally open multipurpose solid-state relay. It is designed to replace
electromechanical relays in general purpose switching applications. The relay consists of an integrated circuit that drives two rugged
source-to-source enhancement type DMOS transistors - optically coupled to a light emitting diode. This device also includes current-
limiting circuitry. During increased load currents or transient current spikes, this circuitry acts to bring the current down, protecting
downstream components.
DESCRIPTION
FEATURES APPLICATIONS
OPTIONS/SUFFIXES*
SCHEMATIC DIAGRAM
ABSOLUTE MAXIMUM RATINGS*
APPROVALS
High input-to-output isolation
•
Low input control power consumption
•
110mA maximum continuous load current
•
40 ohms maximum on-resistance
•
Long life/high reliability
•
Current limiting
•
Reed relay replacement
•
Meter reading systems
•
Medical equipment
•
Battery monitoring
•
Multiplexers
•
Surface Mount Option
•
-S
Tape and Reel Option
•
-TR
NOTE: Suffixes listed above are not included in marking on
device for part number identification.
PARAMETER UNIT MIN TYP MAX
Storage Temperature °C -55 125
Operating Temperature °C -40 85
Continuous Input Current mA 40
Transient Input Current mA 400
Reverse Input Control
Voltage
V 6
Output Power Dissipation mW 800
*The values indicated are absolute stress ratings. Functional operation of the
device is not implied at these or any conditions in excess of those defined in
electrical characteristics section of this document. Exposure to Absolute
Ratings may cause permanent damage to the device and may adversely
affect reliability.
BABT CERTIFICATE #607836:
BS EN 60950, BS EN 41003, BS EN 60065
•
CSA CERTIFICATE #LR111581-1
•
UL FILE #E90096
•
rev 1.4 (10/25/04)
© 2004 Solid State Optronics • San José, CA
www.ssousa.com • +1.408.293.4600
Page 1 of 6 AD6C111-L