AD6C223
1 Form C
Solid State Relay

The AD6C223 is composed of two distinct relays; one normally open and one normally closed sharing a common input, making this a
true 1 Form C device. Each relay has a bi-directional, single-throw contact controlled simultaneously by an LED driver. The driver
activates an integrated circuit, which in turn drives each pair of DMOS transistors. These transistors are protected with free-wheeling
diodes that can handle up to 1.5A of inrush current, making the relay ideal for switching lamps and highly inductive loads.
DESCRIPTION
FEATURES APPLICATIONS
OPTIONS/SUFFIXES*
SCHEMATIC DIAGRAM
ABSOLUTE MAXIMUM RATINGS*
APPROVALS
True 1 Form C device
•
Low input control power consumption (5mA MAX)
•
150mA maximum continuous load current
•
25 ohms maximum on-resistance (Form A)
•
25 ohms maximum on-resistance (Form B)
•
High input-to-output isolation
•
Long life/high reliability
•
Reed relay replacement
•
Meter reading systems
•
Medical equipment
•
Battery monitoring
•
Multiplexers
•
Surface Mount Leadform Option
•
-S
Tape and Reel Option
•
-TR
NOTE: Suffixes listed above are not included in marking on
device for part number identification.
PARAMETER UNIT MIN TYP MAX
Storage Temperature °C -55 125
Operating Temperature °C -40 85
Continuous Input Current mA 50
Transient Input Current mA 400
Reverse Input Control
Voltage
V 6
Output Power Dissipation mW 600
*The values indicated are absolute stress ratings. Functional operation of the
device is not implied at these or any conditions in excess of those defined in
electrical characteristics section of this document. Exposure to Absolute
Ratings may cause permanent damage to the device and may adversely
affect reliability.
1
3
+ Input
2
6
4
5
- Input
Normally Closed
Common
Normally Open
BABT CERTIFICATE #607836:
BS EN 60950, BS EN 41003, BS EN 60065
•
CSA CERTIFICATE #LR111581-1
•
UL FILE #E90096
•
© 2004 Solid State Optronics • San José, CA
www.ssousa.com • +1.408.293.4600
Page 1 of 6 AD6C223
rev 1.40 (10/25/2004)