AD4C113
器件描述：1 Form A/1 Form B Solid State Relay
器件厂商：SSOUSA [Solid State Optronic]
文件大小：220.7KB，共6页
Sponsor by e络盟器件资料摘要：
AD4C113
1 Form A/1 Form B
Solid State Relay
The AD4C113 is composed of two isolated relays; one normally open and one normally closed. Each relay has a bi-directional, single-
pole, single-throw contact. Completely independent of its counterpart, each consists of an LED driver that activates an integrated circuit,
which in turn drives a pair of DMOS transistors. These transistors are protected with free-wheeling diodes that can handle up to 1.5A of
inrush current, making the relay ideal for switching lamps and highly inductive loads.
DESCRIPTION
FEATURES APPLICATIONS
OPTIONS/SUFFIXES*
SCHEMATIC DIAGRAM
ABSOLUTE MAXIMUM RATINGS*
APPROVALS
1 Form A / 1 Form B integrated in 1 package
•
Low input control power consumption (2.5mA TYP)
•
120mA maximum continuous load current
•
35 ohms maximum on-resistance (Form A)
•
35 ohms maximum on-resistance (Form B)
•
High Input - Output Isolation
•
Long life/high reliability
•
Reed relay replacement
•
Meter reading systems
•
Medical equipment
•
Battery monitoring
•
Multiplexers
•
Surface Mount Option
•
-S
Tape and Reel Option
•
-TR
NOTE: Suffixes listed above are not included in marking on
device for part number identification.
PARAMETER UNIT MIN TYP MAX
Storage Temperature °C -55 125
Operating Temperature °C -40 85
Continuous Input Current mA 40
Transient Input Current mA 400
Reverse Input Control
Voltage
V 6
Output Power Dissipation mW 800
*The values indicated are absolute stress ratings. Functional operation of the
device is not implied at these or any conditions in excess of those defined in
electrical characteristics section of this document. Exposure to Absolute
Ratings may cause permanent damage to the device and may adversely
affect reliability.
BABT CERTIFICATE #607836:
BS EN 60950, BS EN 41003, BS EN 60065
•
CSA CERTIFICATE #LR111581-1
•
UL FILE #E90096
•
© 2004 Solid State Optronics • San José, CA
www.ssousa.com • +1.408.293.4600
Page 1 of 6 AD4C113
rev 1.40 (10/25/2004)
1 Form A/1 Form B
Solid State Relay
The AD4C113 is composed of two isolated relays; one normally open and one normally closed. Each relay has a bi-directional, single-
pole, single-throw contact. Completely independent of its counterpart, each consists of an LED driver that activates an integrated circuit,
which in turn drives a pair of DMOS transistors. These transistors are protected with free-wheeling diodes that can handle up to 1.5A of
inrush current, making the relay ideal for switching lamps and highly inductive loads.
DESCRIPTION
FEATURES APPLICATIONS
OPTIONS/SUFFIXES*
SCHEMATIC DIAGRAM
ABSOLUTE MAXIMUM RATINGS*
APPROVALS
1 Form A / 1 Form B integrated in 1 package
•
Low input control power consumption (2.5mA TYP)
•
120mA maximum continuous load current
•
35 ohms maximum on-resistance (Form A)
•
35 ohms maximum on-resistance (Form B)
•
High Input - Output Isolation
•
Long life/high reliability
•
Reed relay replacement
•
Meter reading systems
•
Medical equipment
•
Battery monitoring
•
Multiplexers
•
Surface Mount Option
•
-S
Tape and Reel Option
•
-TR
NOTE: Suffixes listed above are not included in marking on
device for part number identification.
PARAMETER UNIT MIN TYP MAX
Storage Temperature °C -55 125
Operating Temperature °C -40 85
Continuous Input Current mA 40
Transient Input Current mA 400
Reverse Input Control
Voltage
V 6
Output Power Dissipation mW 800
*The values indicated are absolute stress ratings. Functional operation of the
device is not implied at these or any conditions in excess of those defined in
electrical characteristics section of this document. Exposure to Absolute
Ratings may cause permanent damage to the device and may adversely
affect reliability.
BABT CERTIFICATE #607836:
BS EN 60950, BS EN 41003, BS EN 60065
•
CSA CERTIFICATE #LR111581-1
•
UL FILE #E90096
•
© 2004 Solid State Optronics • San José, CA
www.ssousa.com • +1.408.293.4600
Page 1 of 6 AD4C113
rev 1.40 (10/25/2004)